Phoenix Model 1:9 1/4 A-26 Invader Twin GP/EP ARF 90.5"

Tower Stock# LXGPRX  •  Manufacturer Stock# PH170
  • front/side (see larger view)
  • out of package (see larger view)
Notes from our tech department:
**Additional Technical Info Will Be Added When It Becomes Available.**

This is the Radio Controlled, Gasoline or Electric Powered, Almost Ready to Fly
.46-.55 1:9 1/4 Scale A26 Invader Warbird from Phoenix Model.
For Intermediate Flyers.

FEATURES

Construction: Balsa and ply
Wing: Two-piece, functional flaps
Landing Gear: Air-retract with CNC machined metal suspension struts,
air valve system with quick-connect air hose
Wheels: Three, 4" (100mm) diameter
Covering: High-quality self-adhesive
Cowls: Fiberglass
Motor Mounts: Plywood
Engine Mounts: Two-piecce composite plastic
Cockpit: Detailed with instrument panel, painted pilot bust
Canopy: One-piece with painted-on frame lines
Fuel Tank: --oz (--cc)
Warranty: Phoenix Model guarantees this kit to be free from defects
in both materials and workmanship at date of purchase by the
purchaser

INCLUDES

Prebuilt and covered Wing, Tail and Fuselage sections, Landing Gear,
Fuel Tank, Pilot Bust, Decals and Instruction Manual

REQUIREMENTS

Radio: At least 8-channel
Servos: 9 standard size, high torque (1-elevator, 2-flap, 1-rudder,
2-aileron, 2-throttle, 1-air valve control)
Receiver Batteries: Two 6.0V NiMH, at least 2400mAh
Building and field equipment
Electric Power;
Brushless Motors: Two Great Planes Rimfire .32 recommended
ESCs: Two high-voltage, such as the Castle Creations HV Series
Propeller: 12x6 - 13x8 electric
LiPo Battery: Two 4S at least 4500mAh
Gasoline Power;
Engines: Two .46-.55 2-stroke gasoline
Propeller: To match selected engine

SPECIFICATIONS

Wingspan: 90.5" (2300mm)
Length: 65.5" (1664mm)
Flying Weight: 15.4 - 17.6lbs (7000 - 8000g
Wing Area: 951 sq in (61.4 sq dm)
Wing Loading: 34.41 oz/sq/ft (105 g/sq dm)
Wing Type: NACA airfoils
Servo Mount: 0.83 x 1.6" (21 x 42mm)
Center of Gravity (CG): 3.9" (100mm) back from leading edge of wing
measured at the fuselage
Control Throws: Low Rate High Rate
Ailerons, up/down: 0.35" (9mm) 10% expo 0.55" (14mm) 12% expo
Elevators, up/down: 0.43" (11mm) 12% expo 0.55" (14mm) 12% expo
Rudder, right/left: 0.79 (20mm) 15% expo 1.4" (35mm) 15% expo
Landing Gear, down: 0.59" (15mm)

jxs 06/06/17

Resources
Know Before You Fly
Easy RC: Airplanes
Manufacturer Mailing Address
Additional Manufacturer Contact Info