Phoenix Model Piper J-3 Cub GP/EP/Gas ARF 90.5"

Tower Stock# LXGPSM  •  Manufacturer Stock# PH160
  • front/side (see larger view)
  • rear/side (see larger view)
Notes from our tech department:
**Additional Technical Info Will Be Added When It Becomes Available.**

This is the Radio Controlled, Electric, Glow or Gasoline Powered
120/20cc 1:4 3/4 Scale Piper J3 Cub from Phoenix Model.
For Intermediate Flyers.

FEATURES

Construction: Laser cut balsa and light plywood with hard points for
mounting scale float kit (not included) built into fuselage,
operational cockpit side-doors
Wing: Two-piece with quick-connect, streamlined wing struts, dual
servo control flaps and ailerons
Covering: High quality heat shrink
Cowl:
Canopy:
Landing Gear:
Wheels:
Engine Mount: Two-piece composite plastic
Motor Mount: Plywood
Fuel Tank:
Warranty Period: 90 day limited warranty beginning at date of
purchase

INCLUDES

Prebuilt and covered, Wing, Fuselage and Tail assemblies, Landing
Gear, Wheels, Cockpit Instrument Panel, Painted Pilot, Hardware
Package

REQUIREMENTS

Electric Power;
Brushless Motor: Rimfire 1.20 recommended
Electronic Speed Control:
Battery: 6S LiPo
Battery Charger, LiPo Charging Bag

Glow Power;
Engine: 1.20 two-stroke
Glow Fuel, Glow Starter, Electric Starter

Gasoline Power;
Engine: 20cc two-stroke

Radio: At least 8-channel
Servo: 7 standard servo: 2 aileron; 2 flap; 1 elevator; 1 rudder; 1
throttle (if using glow or gasoline engine)
Receiver Battery: 6.0V, at least 2400mAh NiMH
Spinner:
Propeller: Compatible with selected brushless motor, or glow/gasoline
engine
Building and field equipment

SPECIFICATIONS

Wingspan: 90.5" (2300mm)
Length: 60.6" (1541mm)
Flying Weight: 13.2 - 14.3lbs (6000 - 6500g)
Wing Area: 1219 sq in (78.6 sq dm)
Wing Loading: 25.0oz/sq in (76.3g/sq dm)
Wing Type: NACA airfoils
Servo Mount: 0.83 x 1.6" (21 x 42mm)

jxs 05/08/17

Resources
Know Before You Fly
Easy RC: Airplanes
Manufacturer Mailing Address
Additional Manufacturer Contact Info