Tower Hobbies Sbach 3D EP Aerobatic Airplane ARF 49.5"

Tower Stock# LXGPXJ  •  Manufacturer Stock# TOWA2026
  • front/side (see larger view)
  • rear/side (see larger view)
  • top (see larger view)
  • bottom (see larger view)
WARNING: Drilling, sawing, sanding, or machining wood products generates wood dust and other substances known to the State of California to cause cancer.
Notes from our tech department:
**Additional Technical Info Will Be Added When It Becomes Available.**

This is the Electric Powered, Radio Controlled, Almost Ready to Fly
Sbach 49.5" 3D Airplane.
For Intermediate to Advanced Pilots


Aileron Control: Dual servo
Motor Mount: Assembled plywood
Landing Gear:
with --" (--mm) diameter main wheels, --" (--mm) diameter tailwheel
Wheel Pants:
Spinner: --"
Warranty Period: Tower Hobbies guarantees this kit to be free from
defects in both material and workmanship at the date of purchase.
This warranty does not cover any component parts damaged by use or


Prebuilt Wing, Fuselage and Tail sections, Cowl, Landing Gear, Wheel


Radio: At least 4-channel with 4-5 channel receiver
Servos: Four mini
6" (150mm) Servo Extensions: Four for ailerons
Motor: ElectriFly Rimfire .32 recommended
ESC: 75A if using motor recommended above
LiPo Battery: 3300-4000mAh 4S
Battery Charger: Compatible with selected battery
Propeller: 13x8E or 14x7E
LiPo Charge Bag
Building and field equipment


Wingspan: 49.6" (1260mm)
Length: 47.5" (1207mm)
Wing Loading: 19-20oz sq-ft (58-62g sq/dm)
Wing Area: 482.0 sq in (31.1 sq dm)
Weight: 4.0-4.3lbs (1814-1928g)
Center of Gravity (CG): 3-1/4" (83mm) back from the leading edge of
the wing measured at the fuselage.
Wing Joiner:
Recommended CG Range: 2-3/4" - 3-3/4" (70mm - 95mm)
Control Surface Throws;
Low Rate High Rate 3D
Ailerons, 7/8" (22mm) 13 1-1/2" (38mm) 23 2-1/2" (64mm) 40
Elevator, 5/8" (16mm) 9 1-1/4" (32mm) 17 2-1/2" (64mm) 37
Rudder 1-1/2" (38mm) 15 2" (51mm) 20 2-1/2" (64mm) 25

jxs 07/18/17

Know Before You Fly
Easy RC: Airplanes
Manufacturer Mailing Address
Additional Manufacturer Contact Info