Associated 1/10 SC10.3 JRT Brushless RTR LiPo Combo

Tower Stock# LXGVHY  •  Manufacturer Stock# 7082C
  • front/side (see larger view)
  • rear/side (see larger view)
  • top (see larger view)
  • bottom (see larger view)
  • out of package (see larger view)
  • packaging (see larger view)
Shipping Note:Details
Product WarningDetails
Easy Pay
Request 3 Payments ($116.67, $116.66, $116.66) Details
Notes from our tech department:
This is the 2.4GHz Radio Controlled, Brushless Electric Powered, 1/10 scale
Ready to Run SC10.3 Short Course Truck with the JRT Body,
7.4V LiPo Battery and Reedy 423-S Charger.

FEATURES

Chassis: Molded composite plastic with low center of gravity design
Drive: Rear wheel
Differential: Heavy-duty sealed gear with externally adjustable V2
slipper clutch
Radio: XP120 2.4GHz 2-channel pistol grip with steering and throttle
trim and dual rate, metal-gear, high-torque Reedy digital steering
servo
Motor: Reedy 3300Kv brushless motor
Electronic Speed Control: Water resistant Reedy brushless ESC with
T-plug battery connector and low voltage LiPo cutoff
LiPo Battery: Reedy 7.4V LiPo battery with T-plug
Battery Charger: Reedy 423-S balancing charger
Shocks: V2 coil-over, aluminum body with anodized blue finish
Wheels: Short course KMC replica, 12mm hex drive, width 1.6" (41mm),
Diameter: 3" (76mm)
Tires: High traction racing compound
Steering: Angled bellcrank "coplanar" design with integral servo
saver
Body: Trimmed and factory finished
Suspension: Fully adjustable geometry with steel turnbuckles for
adjustable camber and front toe-in, vertical ball ends for front
and rear roll center adjustments
Caster: Adjustable front and rear, caster/toe-in refers to the angle
of the front when viewed from the side of the car in relation to
the chassis
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Ball Bearings: Fourteen rubber sealed
Bumpers: Front and rear composite plastic with AE logo rear mud flaps
Warranty: 90 day limited warranty through Team Associated beginning
at date of purchase

INCLUDES

RTR SC10.3 Short Course Truck with the JRT Body, Radio System, ESC,
Brushless Motor, Reedy 7.4V LiPo Battery, Reedy Balancing Charger,
Decals and Instruction Manual

REQUIREMENTS

AA Cells: Four for transmitter
Track and maintenance equipment

SPECIFICATIONS

Vehicle;
Length: 21.65" (550mm)
Width: 11.54" (293mm)
Wheelbase: 12.87" (327mm)
Weight: 4.59lbs (2080g)
Gear Ratio: 2.6:1
Body:
Length: 21" (533mm)
Width: 8.8" (224mm) behind front wheels, narrowest point
11.1" (282mm) at rear wheels, widest point
Height: 5.9" (149mm)

COMMENTS

Available with the following trim schemes;
Lucas Oil-Carl Renezeder, ASCD7083
Jhonlin Race Team (JRT)-Doug Mittag, ASCD7084

For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
4 3/16x3/8" Steering Knuckles 2 DTXC1423
2 3/16x3/8" Idler Gear Shaft 1 DTXC1423
2 10x16mm Transmission 1 ASCC9832
4 3/16x3/8" Rear Hubs 2 DTXC1423
2 5/32x5/16" Diff gear 1 DTXC1411

jxs 07/19/17
ir/jxs

Resources
Easy RC: Cars & Trucks
Manufacturer Mailing Address
Additional Manufacturer Contact Info