Phoenix Model Waco 50-61cc Gas/EP ARF

Tower Stock# LXGWWE  •  Manufacturer Stock# PH173
  • front/side (see larger view)
  • rear/side (see larger view)
  • top (see larger view)
  • bottom (see larger view)
WARNING: Drilling, sawing, sanding, or machining wood products generates wood dust and other substances known to the State of California to cause cancer.
Notes from our tech department:
**Additional Technical Info Will Be Added When It Becomes Available.**

This is the Radio Controlled, Gasoline or Electric Powered Almost Ready to Fly
Waco 50-61cc 1/4 scale Biplane from Phoenix Model.
For Intermediate Flyers

FEATURES

Construction: Balsa and plywood
Wing: Two-piece removable, with aluminum joiner tube, dual servo
aileron control
Hatch: Removable for access to radio equipment, two painted pilot
busts and cockpit detail
Cowl:
Landing Gear: Two-piece prebent aluminum with --" (--mm) diameter
main wheels, --" (--mm) tailwheel
Wheel Pants:
Spinner: Scale type, 3.7" (95mm) diameter
Warranty: Phoenix Model guarantees this kit to be free from defects
in both materials and workmanship at date of purchase by the
purchaser.

INCLUDES

Prebuilt Wing, Tail and Fuselage sections, Landing Gear, Wheels,
Spinner, Decals, Hardware and Instruction Manual

REQUIREMENTS

Radio: At least 8-channel
Servos: Five high torque (2-aileron, 2-elevator, 1-rudder)
One standard servo for throttle if using gasoline engine
Receiver Battery: 6.0V at least 2400mAh
Building and field equipment
Electric Power;
Brushless Motor:
Electronic Speed Control: To match selected motor
LiPo Battery:
Battery Charger: Compatible with selected battery
Propeller: To match selected motor
Gasoline Power;
Engine: 50-61cc two stroke
Ignition Battery: 6.0V at least 2400mAh
Building and field equipment
Propeller: To match selected engine

SPECIFICATIONS

Wingspan: 90.5" (2300mm)
Length: 73.7" (1873mm)
Wing Area: 2519 sq in (162.5 sq dm)
Wing Loading: 25.20oz/sq in (76.9g/sq dm)
Wing Type: NACA airfoils
Weight: (12.5 - 13.5kg)
Servo Mount: 0.83 x 1.6" (21 x 42mm)
Center of Gravity (CG): 6.7" (172mm) back from leading edge of upper
wing
Control Throws- Low High
Ailerons 0.71" (18mm) 10% expo 0.87" (22mm) 10% expo
Elevator 0.71" (18mm) 12% expo 0.87" (22mm) 12% expo
Rudder 1.2" (30mm) 15% expo 1.6" (40mm) 15% expo

jxs 09/14/17

Resources
Know Before You Fly
Easy RC: Airplanes
Manufacturer Mailing Address
Additional Manufacturer Contact Info