View Larger Picture

On-line Videos:	Video 1 (3.4 MB)
Instruction Manuals:	Manual 1 (2.7 MB)
Tower Catalog Page:	170
E-mail This Page To A Friend

     This is the Futaba 3-Channel 3VCS Computer 2-Stick Radio with the
                             2.4GHz FASST System.
          Transmitter and R603FS receiver only, servos not included.
        Ideal for car, truck and boat modelers who prefer stick radios.

FEATURES: FASST (Futaba Advanced Spread Spectrum Technology) sends twice as
            much information to the receiver at eight times the resolution of
            standard systems for unsurpassed control and smooth servo travel
          2.4GHz circuitry is wired directly into transmitter eliminating
            separate plug-in modules
          "Auto Detect" instantly determines whether HRS or PPM mode is active
            in the transmitter
          Special ID code prevents signal interruption by rejecting unwanted
            signals
          Stick position angle adjustment (+5 to -5°)
          In addition to great performance in R/C car and truck applications,
            this system is also ideally suited to the rigors of boat racing
          "New Driver" "Race Ready" and "Expert" menus
          Traction control and brake mixing (front/rear independent) w/delay
          "Direct Select" programming shortcuts
          Sub-trim, servo reversing and EPA on all channels
          Throttle start/acceleration
          One year limited warranty

INCLUDES: 2.4GHz FASST Futaba 3-Channel 3VCS transmitter with module, flat
            blade screwdriver, ratchet plate for throttle stick and on/off
            switch
          2.4GHz FASST Futaba R603FS 3-Channel Receiver (FUTL7630)

REQUIRES: Servos of modeler's choice
          Eight AA batteries for transmitter (SANP3501) or Futaba NT8F700B
            700mAh NiCD battery pack (FUTM1462)

SPECS:    Transmitter;
            Current Drain: 300mA or less
            Transmitting Antenna: 2.4GHz

          Receiver;
            Reception Antenna: Diversity type (internal and external)
          Power Requirement: 6V NiCd battery
          DSC Function Available
          Size: 1.5 x 1 x 0.55" (39 x 26 x 14mm)
          Weight 0.50oz (14.1g)

                                                                   jxs 04/13/07
                                                                         ir/jxs



– If you need more information, use these Futaba resources –

Click Here: Manufacturer's Product Web Page
E-mail: support@futaba-rc.com
Web Site: http://www.futaba-rc.com/
Phone: 217-398-8970


 
Postal Address:
Futaba
3002 N. APOLLO DRIVE, SUITE #1
CHAMPAIGN, IL 61822  








Click here for Units of Measure Conversion Calculators