View Larger Picture

Instruction Manuals:	Manual 1 (208 KB)
Parts Express Eligible:	Yes

       This is the Futaba MC401CR Electronic Speed Control with Reverse
                     for motors with 10 turns and above.

FEATURES: SMD MOSFETs with smallest internal resistance for minimal loss and
            maximum performance
          Forward, Reverse, and Brake operations are all linear
          Reverse operation cancellation function
          Heat and low voltage protection
          Serial port communication with a PC (Futaba CIU-2 Interface, FUTM0951
            required)
          Serial communication function-
            Data logging read and erase (Data logging memorizes the running
              current and power supply voltage for approximately 8-minutes at
              second intervals)
            Variable frequency range settings: 100Hz to 10kHZ (Sets the load
              response system variable frequency range)
            Dead band: ±2µs ~ ±55µs (Neutral point range can be set)
            Low battery protection voltage setting: 2.5V ~ 6V  (Sets the
              voltage which cuts the output to the motor when the power supply
              voltage is dropped)
            Current Limiter: 50A ~ 300A  (The current limit for suppressing
              power can also be set and turned off)
            Brake mix:  0% ~ 100% (Sets the brake strength of the max brake
              point from neutral)
            Neutral brake:  0% ~ 100% (Brake setting at the throttle neutral
              point)

INCLUDES: Futaba MC401CR Electronic Speed Control with Reverse

REQUIRES: Installing in vehicle and connecting to motor, receiver and battery
          NiCd or NiMH battery 4 - 6 cells (4.8V - 7.2V)

SPECS:    Operating system:  Forward and brake (Resolution 255)
          Power requirement: NiCd, NiMH battery 4~6 cells (4.8 ~ 7.2V)
          PWM frequency-
           Forward: 100Hz ~ 10kHz  Initial value: 2.5kHz ~ 3kHz
           Brake: 2kHz
          BEC voltage: 6V
          Setting: One-touch button
          Current capacity: FET rating
           Forward: 360A (Momentary load: 440A)
           Brake: 120A
          Fuse: 30A
          Battery reverse protection/overload protection
          Case size: 1.01 x 1.03 x .51" (25.7 x 26.2 x 12.9mm)
            (excluding protruding parts)
          Silicone wire gauge size: 14AWG equivalent
          Weight: .39oz (11.2g)

                                                                   jxs 11/20/07
                                                                         ir/jxs



– If you need more information, use these Futaba resources –

Click Here: Manufacturer's Product Web Page
E-mail: support@futaba-rc.com
Web Site: http://www.futaba-rc.com/
Phone: 217-398-8970


 
Postal Address:
Futaba
3002 N. APOLLO DRIVE, SUITE #1
CHAMPAIGN, IL 61822  








Click here for Units of Measure Conversion Calculators