View Larger Picture

Tower Catalog Page:	139
E-mail This Page To A Friend

       This is the Mamba Monster Monster Truck and Extreme 1/8 Scale
              Brushless Power System from Castle Creations.

FEATURES: Motor: Neu-Castle 2200 KV motor
                 Intended for 4S-6S (16.8-25.2 Volt) operation
                 Designed for Monster Truck and 1/8 scale Truggy applications
                 (see COMMENTS)
                 Comes standard with a Neo rotor on a 5mm shaft
                 High end bearings for trouble free operation
                 Machined integrated cooling fins
                 4 pole, slotted, brushless motors wound 1 turn in a Y
                     configuration
          ESC: Designed for extreme 1/8 scale monster truck applications
               Profiles can be custom designed on a PC
               Infinitely adjustable throttle and brake curves with timing
                 advance
               Punch Control allows dialing in horsepower where needed
               Brake Strength allows straight tracking under hard braking
               Drag Brake helps entry into corners
                Start Power for smooth launches
                Programmable cutoff voltage for LiPo usage
                On/Off switch
                Universal receiver connector

INCLUDES: 2200kv Neu/Castle motor
          18 tooth Pinion gear
          Mamba monster version 3 speed control

REQUIRES: Installing into vehicle
          USB cable

SPECS:    Motor: Length: 75.5mm (2.97")
                 Diameter: 40.5mm (1.59")
                 Weight: 121g (4.27oz)
                 Shaft Diameter: 5mm (.2")
                 Max Input Volts: 25.2v
                 Amp Rating: 120
               Wire Lead Guage: 10 ga

          ESC: Cells: 18  NiCd/NiMH, 6 cell LiPo
               Continuous: N/A
               Resistance: .0003 Ohm
               Brake: Proportional with adjustable curve
               Reversible: Yes, with lockout
               Low Voltage Cut-off: Programmable
               Size: 2.2 x 1.9 x 1.4" (56 x 48 x 35mm)
               Weight: 4.3oz (121g)
               Connector Type: 6.5mm

COMMENTS: Use the 2650Kv motor for 1/8 scale Buggy applications.

                                                                   lmm 12/17/08
                                                                         ir/jxs
                                                               updt jxs 8/20/09



– If you need more information, use these Castle Creations resources –

E-mail: support@castlecreations.com
Web Site: http://www.castlecreations.com/
Phone: 913-390-6939


 
Postal Address:
Castle Creations
235 S KANSAS AVE
OLATHE, KS 66061  








Click here for Units of Measure Conversion Calculators