View Larger Picture

Additional Pictures:	Picture 1 Picture 2 Picture 3 Picture 4 Picture 5 Picture 6
On-line Videos:	Video 1
Instruction Manuals:	Manual 1 (109 MB)
Tower Catalog Page:	103
E-mail This Page To A Friend

           This is the 1/5 scale, gasoline powered, radio controlled,
                    HPI Baja 5T Ready to Run Off-Road Truck.
            Uses many existing Baja 5B spare parts and option parts.

FEATURES: Chassis: Black anodized 4mm 6061-T6 aircraft grade extruded and CNC
            milled, chassis guards, extended upper roll cage for spark plug
            protection
          Drive: Rear wheel gear drive
          Engine: 2 cycle 1.6 cu in (26cc) gasoline with pull starter,
            dual element foam air filter, primer, choke, kill switch and built
            in cooling fan
          Exhaust: Steel muffler routed to rear of vehicle with aluminum pipe
          Radio: HPI TF-10 3-channel FM 27MHz with steering and throttle trim
            steering dual rate, transmitter does not have charge jack, 3rd
            channel switch is for optional accessories, receiver has adjustable
            failsafe, 6V 2000mAh rechargeable receiver pack, AC charger
            water resistant housing on chassis with external charging jack and
            rubber cap for easy crystal changes
          Servos: Water resistant SFL-10MG2 metal gear ball bearing equipped
            steering servo
          Receiver Battery: 3000mAh, five sub C-cell 6V NiMH rechargeable pack
          Clutch: High performance 8,000 RPM
          Ball Bearings: Full set included, 23 total
          Shocks: VVC/HD oil-filled coil over design with large diameter shafts
            16 hole rear pistons with sealing ring for consistent damping
          Shock Towers: Composite
            with modified rear brace for increased suspension travel
          Transmission: 19 tooth transmission top gear for quick acceleration
            and top speed, all gears are metal
          Rear Dogbones: Metal construction with rubber boots
          Gearbox: Sealed
          Differentials: Viscous Torque Control can be tuned using different
            weight diff oils, hardened metal planetary gears
          Brakes: Ventilated steel/aluminum hybrid rotor and semi-metallic pads
          Tires: Desert Buster heavy duty rubber compound and thicker carcass
            for extra durability, heavy duty rear inner foam inserts
          Wheels: Outlaw eight hole design, nylon construction heavy duty bead
            locks
          Body: 0.08" (2mm) thick polycarbonate truck body pre-painted black
            or white with new body mounting system featuring eight nylon
            mounting points
          Rear Wing: Molded nylon with integrated rear body brace
          Roll Cage: Baja style high impact nylon protects engine and body
            from crash damage
          Suspension: Fully adjustable with turnbuckles, double wishbone, front
            and rear sway bars
          Caster: Adjustable, front, caster/toe-in refers to the angle of the
            front suspension when viewed from the side of the car in relation
            to the chassis
          Camber: Adjustable, front and rear, camber refers to the angle of the
            tops of the tires from vertical when viewed from front or
            behind vehicle
          Warranty: 2-year limited through manufacturer beginning at date of
            purchase

INCLUDES: HPI Baja 5T RTR truck with 1.6 cu in (26cc) gasoline engine 27MHz
            FM radio, two water resistant servos, 3.4oz (100cc) 2-cycle oil,
            2oz (60cc) shock oil, 1oz (30cc) diff oil, 1oz (30cc) air filter
            oil, tube of gear grease, 3000mAh receiver pack, wall charger, body
            with wing, extra air filter, wrenches, decal sheet and illustrated
            instruction manual

REQUIRES: Unleaded Gasoline: 87-93 octane, mix gasoline and two cycle oil
            at 25:1 ratio
          Transmitter Batteries: 8 AA
          Screwdriver: Flat blade, 3/16" (4-5mm) wide

SPECS:      Vehicle-
          Length: 35.4" (900mm)
          Front Width: 17.3" (440mm)
          Rear Width: 18.1" (460mm)
          Height: 12.6" (320mm)
          Weight: 27.8lbs (12.6kg)
          Wheelbase: 22.4" (570mm)
          Ground Clearance: 3" (76mm)
          Front Tread: 14.5" (370mm)
          Rear Tread: 15.4" (391mm) distance between center of tires side-to-
            side
          Front Track: 17" (432mm)
          Rear Track: 17.8" (453mm) distance between outer edges of tires side-
            to-side
          Tires- Front: Outer Diameter: 7.5" (190mm), Width 2.4" (60mm),
            Inner Diameter: 5.1" (130mm)
                  Rear: Outer Diameter: 7.5" (190mm), Width 2.7" (70mm),
            Inner Diameter: 5.1" (130mm)
            Body-
          Length:   35.5"  (902mm)
          Width:    17.5"  (445mm)
          Height:    8.25" (210mm)
          Thickness: 0.08" (2mm)

COMMENTS: Bodies are painted either black or white. It is not possible to
            request a specific color as they are packaged by the manufacturer
            at random.

          For Replacement Ball Bearings use:
            Qty.  Size      Location              Qty     Bearing Set
             4    12x24mm   Fr Wheel Hubs          2       HPIC0089
             4    12x24mm   R Wheel Hubs           2       HPIC0089
             2    10x15mm   Steering Shafts        1       DTXC1595
             2    17x30mm   Idler Gear             1       HPIC0092
             2    12x24mm   Drive Gear             1       HPIC0089
             1    12x24mm   Spur Gear Mount        1       HPIC0089
             2    10x15mm   Diff                   1       DTXC1595

                                                                   jxs 09/05/08
                                                                         ir/jxs



– If you need more information, use these HPI Racing resources –

E-mail: support@hpiracing.com
Web Site: http://www.hpiracing.com/
Phone: 949-753-1099


 
Postal Address:
HPI Racing
70 ICON STREET
FOOTHILL RANCH, CA 92610  








Click here for Units of Measure Conversion Calculators