View Larger Picture

Additional Pictures:	Picture 1 Picture 2 Picture 3 Picture 4
Instruction Manuals:	Manual 1 (19 MB)
Tower Catalog Page:	103
E-mail This Page To A Friend

   This is the 1/10 scale electric powered, radio controlled, ready to run
                        HPI Brama 10B Off-Road Buggy.

FEATURES: Chassis: Plastic bathtub type 0.079" (2mm) thick
          Drive: Four wheel shaft
          Radio: HPI TG-1 27MHz AM pistol grip radio system with SG-1 standard
            steering servo
          Electronic Speed Control: EN-1 with reverse
          Motor: HPI Saturn 35 turn for extended run time with preset mounting
            positions making gearing changes easier
          Charger: AC wall type
          Battery: 7.2V 1500mAh NiCD 6-cell stick pack with Standard connector,
            battery compartment will hold stick or side by side packs
          Shocks: Composite bodied oil filled
          Gearboxes: Closed
          Differentials: Front and rear bevel-type
          Transmission: Single-speed with steel dogbones
          Tires: HPI Digger stud type, hard compound for any type of off-road
            surface
          Wheels: White plastic seven spoke, Front 1.2" (30mm) wide, 2.2"
            (56mm) diameter, Rear 1.4" (35mm) wide, 2.2" (56mm) diameter
          Spur Gear: 65 tooth plastic
          Pinion Gear: 24 tooth metal
          Bumpers: Nylon front
          Body: Pre-painted polycarbonate with molded nylon wing and preapplied
            decals
          Suspension: Nylon double wishbone
          Caster: Non-adjustable, caster/toe-in refers to the angle of the
            front suspension when viewed from the side of the car in relation
            to the chassis
          Camber: Non-adjustable, camber refers to the angle of the tops
            of the tires from vertical when viewed from front or behind vehicle
          Steering: Bell-crank type with servo saver
          Warranty: Two year limited, valid only in the U.S.A., Canada and
            South America

INCLUDES: HPI Brama 10B Buggy with painted body, 65T spur gear, 24 tooth metal
            pinion gear, ESC, battery, charger, wheels, tires,  motor, 2-ch
            radio and manual

REQUIRES: AA Batteries: 8 for transmitter
          Misc. Items: Track equipment

SPECS:      VEHICLE-
          Length:      15.3"  (390mm)
          Width,        9.8"  (250mm)
          Height:       4.7"  (120mm)
          Weight: 3.4lbs (1545g) including battery and body
          Wheelbase:   10.5"  (266mm)
          Gear Ratio: 6.86:1
          Tread: Front- 8.5"  (217mm)
                 Rear - 8.46" (215mm) center of tires, side to side
          Track: Front- 9.5"  (242mm)
                 Rear-  9.6"  (244mm) outer edges of tires, side to side
            BODY-
          Length: 10.1" (258mm)
          Width:  5.6"  (143mm)
          Height: 3.7"   (93mm)

COMMENTS: For Replacement Ball Bearings use:
            Qty.  Size      Location              Qty.  Bearing Set
             2   12x18x4mm  Center drive shaft     1     DTXC1597
             4   5x11x4mm   Front Wheel Hubs       2     DTXC1547
             4   5x11x4mm   Rear Wheel Hubs        2     DTXC1547
             2   12x18x4mm  Front Diff Gear        1     DTXC1597
             2   12x18x4mm  Rear Diff Gear         1     DTXC1597

                                                                   jxs 10/02/07
                                                                         ir/jxs



– If you need more information, use these HPI Racing resources –

E-mail: support@hpiracing.com
Web Site: http://www.hpiracing.com/
Phone: 949-753-1099


 
Postal Address:
HPI Racing
70 ICON STREET
FOOTHILL RANCH, CA 92610  








Click here for Units of Measure Conversion Calculators