Tamiya 1/10 Boomerang 2008 4WD Buggy Kit

Tower Stock# LXWGV5  •  Manufacturer Stock# 58418
Tamiya 1/10 Boomerang 2008 4WD Buggy Kit (large view)
Notes from our tech department:
This is the electric powered, radio controlled, 1/10 scale
Tamiya Boomerang Buggy kit.

FEATURES

Chassis: ABS resin bathtub type
Drive: Four wheel shaft
Motor: 540 size
Electronic Speed Control: TEU-101BK Forward and Reverse ESC
Shocks: Three plastic bodied, oil filled
Gearbox: Enclosed
Bumper: Front blade type
Body: Clear polycarbonate
Wheels: Nylon resin 5 hole design, white in color
Tires: Front Semi Pneumatic Super Gripper Tires: outer diameter:
3.5" (88.5mm), inner diameter: 2" (50mm), width: 1" (25.4mm)
Rear Semi Pneumatic Super Gripper Tires: outer diameter: 3.5"
(90mm), inner diameter: 2" (52.6mm), width: 1.5" (37mm)
Steering: Bell crank type with servo saver
Camber: Non-adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Steering Tie Rods: Adjustable, caster/toe-in refers to the angle of
the front suspension when viewed from the side of the car in
relation to the chassis

INCLUDES

1/10 scale Tamiya Boomerang Buggy kit with body, 540 motor, ESC
instruction manual, decal sheet

REQUIREMENTS

Radio: 2-ch with one standard servo
Radio Batteries: 8 AA
Battery: 6-cell stick pack
Battery Charger: Timed or peak for 6-cell battery
Polycarbonate safe paint and building and track equipment

SPECIFICATIONS

CHASSIS-
Length: 245mm (9.6")
Width: 93mm (3.7")
Height: 76mm (3")
BODY-
Length: 10" (254mm)
Width: 5.25" (133mm)
Height: 2.75" (70mm)

COMMENTS

For Replacement Ball Bearings or to Upgrade From Bushings use:
Qty. Size Location Qty. Bearing Set
3 5x11mm Rear Gearbox 2 DTXC1547
1 5x8mm Rear Gearbox 1 DTXC1523
2 5x11mm Front Gear Assembly 1 DTXC1547
2 5x8mm Front Gear Assembly 1 DTXC1523
4 5x11mm Front Hubs 2 DTXC1547
4 5x11mm Rear Hubs 2 DTXC1547

cnh 1/12/09
ir/jxs

Resources
Easy RC: Cars & Trucks
Manufacturer Mailing Address
Additional Manufacturer Contact Info