View Larger Picture

Tower Catalog Page:	141
E-mail This Page To A Friend

     This is the Havoc Spec Brushless Sensored ESC and 10.5T Motor System
                                 from Novak.

FEATURES: Meets ROAR specifications for brushless racing
          Rebuildable 540 size motor equipped with sintered rotor for precise
            throttle response and high temperature resistance, motor also has
            shielded sensor cable
          Fully programmable ESC, user-friendly interface with nine adjustable
            parameters: Minimum Brake (10 settings from 0-27%), Drag Brake (10
            settings from 0-27%), Dead Band (5 settings from 2-6%), Minimum
            Drive (5 settings from 1-5%), Throttle Curve (Linear and Expo),
          Brake Frequency* (7 settings from 1-8 kHz), Reverse*, Motor
            Rotation* & Li-Po Cut-Off (*available only in brushless mode)
          Throttle curve allows experimentation with two throttle responses
            Linear and Expo which range between a quick burst of power to a
            smoother, more controlled low-end power delivery
          Thermal Overload Protection circuitry allows ESC to operate only with
            the SS-Pro series or other brushless motors with built-in thermal
            protection that follow ROAR guidelines
          Brake Frequency adjustment contains seven degrees of adjustability
          LiPo cut-off circuitry prevents batteries from going below the
            critical safety level
          Smart Braking II enables "shifting" from forward to reverse
          120 day warranty on both components

INCLUDES: Novak Havoc Spec Brushless ESC, 10.5 Turn Brushless Motor with power
            capacitor, instructions, double-sided mounting tape

REQUIRES: Installing in model and conncting to battery and receiver
          Pinion gear of modeler's choice

SPECS:      ESC-
          Input Voltage: 2S Li-Po cells or 4-7 NiMH cells (1.2V/cell)
          ESC Size: 1.18 x 1.54" (30 x 39.1mm)
          System Weight (ESC & motor with wires): 9.59oz (272.0g)
          Design: Sensor-based
          Motor Limit (brushless): 8.5-turn Novak 540-size sensored motor
          Motor Limit (brushed): 27-turn for 540-size motor/12-turn for
            550-size motor
          On-Resistance (brushless): 0.0012 ohms @ 25°C trans. temp.
          BEC: 6.0 volts DC / 1.5 amps
          Rated Current: 120 Amps @ 25°C trans. temp
          Braking Current: 120 Amps @ 25°C trans. temp.
          Status LEDs: 4
          Voltage Cut-Off: 6.25V (when Li-Poly Cut-Off Circuitry is enabled)
          Power Wires: 14G Super-Flex Copper-Strand Silicone Wire w/Tamiya
            Battery Plug
            Motor-
          Motor Size: 540 Size: 2.08L x 1.41D (52.8 x 35.8 mm)
          Motor Magnet: 12.3 mm Sintered, high-strength Neodymium
          Motor Watts: 235
          Motor Turn: 10.5
          Motor KV (unloaded): 4,200
          Shaft Diameter: 0.125" (3.2mm) accepts all existing pinion gears
          Bearing Size: 1/2 x 3/16" (12.7 x 4.8mm)

                                                                   jxs 01/13/09
                                                                         ir/jxs



– If you need more information, use these Novak resources –

E-mail: cs@teamnovak.com
Phone: 949-833-8873


 
Postal Address:
Novak
17032 ARMSTRONG AVENUE
IRVINE, CA 92614  








Click here for Units of Measure Conversion Calculators