View Larger Picture

On-line Videos:	Video 1 (38.3 MB)
Instruction Manuals:	Manual 1 (2.6 MB)
Tower Catalog Page:	174
E-mail This Page To A Friend

                This is the Futaba Mode 2 Airplane Version
           10CG Transmitter and R6014FS 14-ch Receiver with the
                             2.4GHz FASST system.
                              No Servos Included.

This version is Mode 2-Left Hand Throttle and Right Hand Elevator, USA Standard
  **For European Standard Mode 1-Right Hand Throttle and Left Hand Elevator**
                              **order FUTK9257**

        This airplane version which will default to airplane settings,
with mode 2 stick operation when powered up and has a ratcheted throttle stick.

FEATURES: Futaba's FASST (Futaba Advanced Spread Spectrum Technology) shifts
            very quickly virtually eliminating signal conficts and
            interruptions unlike other 2.4GHz systems that only stay on one
            or two frequencies
          Dual antenna diversity enables FASST system to automatically and
            seamlessly select the best reception between the two antennas
            built into the receiver ensuring that the aircraft stays under
            constant control of transmitter regardless of altitude
          7 point throttle and pitch curves
          12 factory defined glider mixes
          Logic switches allows timer activation or other function just by
            changing positions of specific sticks or switches
          15-model memory, expandable to 48 models with optional 128K CAMPac
            module (FUTM9408)
          10-character model and user naming
          Assignable switches and dials/functions
          2 proportional slider switches

          Model select, copy, reset
          Fail-safe, sub trims, servo reversing and EPA
          160 x 72 backlit LCD with adjustable contrast
          Servo monitor display
          Auxilliary channel screen for 1-step function/switch assignment
          One year limited warranty

INCLUDES: Futaba 10CG Transmitter
          NT8S700B 9.6V 700mAh NiCd Transmitter Battery , FUTM1460
          NR-4J 600mAh NiCd Receiver Battery, FUTM1280
          FBC-19B RX, TX Wall Charger, FUTM1830
          R6014HS Receiver, FUTL7645
          Switch Harness
          8" (203mm) Servo Extension
          Neck Strap, FUTM5690

REQUIRES: Servos depending on type of aircraft

SPECS:    Transmitter;
            Power Supply: 9.6V NT8S700B NiCd battery
          Receiver;
            Receiving Frequency: 2.4GHz
            Power Requirement: 4.8 - 6V
            Current Drain: 70mA
            Size: 2.06 x 1.48 x 0.63" (52.3 x 37.5 x 16.0mm)
            Weight: 0.72oz (20.8g)

COMMENTS: This radio is available in the following default modes;
            Air Mode 2,  FUTK9255
            Heli Mode 2, FUTK9256
            Air Mode 1,  FUTK9257
            Heli Mode 1, FUTK9258

                                                                    jxs 5/14/09
                                                           updated jpg 05/27/09



– If you need more information, use these Futaba resources –

Click Here: Manufacturer's Product Web Page
E-mail: support@futaba-rc.com
Web Site: http://www.futaba-rc.com/
Phone: 217-398-8970


 
Postal Address:
Futaba
3002 N. APOLLO DRIVE, SUITE #1
CHAMPAIGN, IL 61822  








Click here for Units of Measure Conversion Calculators