This is the Futaba FASSTPak-S with the R603FS Receiver
and two S3004 Standard Ball Bearing .
**Compatible only with Futaba 2.4GHz FASST radio systems.**
FEATURES: Designed for modelers who want to use a single radio transmitter to
operate more than one R/C vehicle
One year limited warranty
INCLUDES: R603FS 3-channel Receiver, FUTL7630
Two S3004 Standard Ball Bearing , FUTM0004
Two 1.4" (35mm) diameter Round Horns
Two 1.2" (32mm) diameter six point Horns
Four 1.5" (38.5mm) diameter four point Horns
Servo grommets and eyelets and mounting screws
On/Off Switch, FUTM4350 (mounting plate & hardware not included)
REQUIRES: Installing in vehicle
SPECS: Receiver-
Reception Antenna: Diversity type (internal and external)
Power Requirement: 6V battery
DSC Function Available
Size: 1.5 x 1 x .55" (39 x 26 x 14mm)
Weight .50oz (14.1g)
-
Speed: .23 sec/60° @ 4.8V
.19 sec/60° @ 6.0V
Torque: 44 oz-in (3.2 kg-cm) at 4.8V
57 oz-in (4.1 kg-cm) at 6.0V
Length: 1.6" (41mm)
Width: .8" (20mm)
Height: 1.4" (36mm)
Weight: 1.3 ounce (37.2 grams)
Connector: "J" type with approx. 5" wire
COMMENTS: FASSTPak systems for surface use are available in the following
configurations;
FUTL1120 R603FF Receiver, 2-S3004
FUTL1121 R603FF Receiver, 2-S3010
FUTL1130 R603FS Receiver, 1-S9452 Servo
FUTL1131 R603FS Receiver, 1-S9350 Servo
FUTL1132 R603FS Receiver, 1-BLS451 Servo
FUTL1133 R603FS Receiver, 1-BLS452 Servo
FUTL1140 R603FS Receiver, 2-S9351
FUTL1141 R603FS Receiver, 2-BLS351
FUTL1143 R603FS Receiver, 1-BLS352 Servo and one BLS351 Servo
jxs 02/05/09
ir/jxs
Click here for Units of Measure Conversion Calculators
|