This is the Futaba FASSTPak-A with the R616FFM Receiver
and three S3114M .
**Compatible only with Futaba 2.4GHz FASST radio systems.**
FEATURES: Designed for modelers who want to use a single radio transmitter to
fly several different Park Flyers and Slow Fly model aircraft
One year limited warranty
INCLUDES: R616FFM 6-channel Receiver, FUTL7626
Three S3114 Micro High Torque w/Micro connector, FUTM0704
Three 0.90" (23mm) diameter Four Point Horns
Three 1.3" (34mm) diameter Four Point Horns
REQUIRES: Installing in aircraft
SPECS: Receiver-
Dimensions: 1.5 x 0.9 x 0.3" (38 x 22 x 7mm)
Weight: 0.22oz (6.3g) with case
0.14oz (4.0g) without case
Power Requirement: 4.8V- 6.0V battery or regulated output from ESC
F/S and Battery F/S function (for channel three)
Battery F/S Voltage: 3.8V
Current Drain: 75mA (w/no ) with or without signal.
Approximate Range: 1000 ft. (305m)
-
6V 4.8V
Torque: 23.5 oz-in (1.7 kg-cm) 20.8 oz-in (1.5 kg-cm)
Speed: .09 sec/60° .10 sec/60°
Dimensions: .86 x .43 x .78" (21.8 x 11 x 19.8mm)
Weight: .27oz (7.8g)
Lead Length: 6.5" (165mm)
Output Spline Diameter: 4mm
COMMENTS: Order DUBM6924 if mounting hardware is required.
FASSTPak systems for aircraft use are available in the following
configurations;
FUTL1160 R616FFM Receiver, 3-S3114M w/Micro Connector
FUTL1161 R616FFM Receiver, 3-S3157M w/Micro Connector
FUTL1162 R617FS Receiver, 3-S3114/ w/Universal Connector
FUTL1163 R617FS Receiver, 3-S3157 w/Universal Connector
FUTL1170 R617FS Receiver, 4-S3004 w/Universal Connector
FUTL1171 R617FS Receiver, 5-S3001 w/Universal Connector
FUTL1172 R608FS Receiver, 4-S3004 w/Universal Connector
FUTL1173 R608FS Receiver, 4-S3151 w/Universal Connector
jxs 02/02/09
ir/jxs
Click here for Units of Measure Conversion Calculators