View Larger Picture

Additional Pictures:	Picture 1 Picture 2 Picture 3
On-line Videos:	Video 1 (30 MB) Video 2 (21 MB)
Product Reviews:	Review 1 Review 2
Instruction Manuals:	Manual 1 (2.4 MB)
Tower Catalog Page:	40
E-mail This Page To A Friend

 This is the radio controlled, electric or glow powered, almost ready to fly
                 Great Planes Reactor Bipe Sport 3D Airplane.
    For Intermediate to Advanced Modeler/Fliers 14 Years of Age and Older.

FEATURES: Construction: Balsa and ply
          Wings: One-piece, secures to fuselage with plywood wing bolt plate
          Radio Compartment: Plywood reinforced, accessible under canopy
          Canopy: Single, clear plastic (pilot figure shown in photos not
            included)
          Aileron Control: Dual servo per wing (four total)
          Covering: Top Flite MonoKote
          Cowl: Painted fiberglass
          Landing Gear: Painted fiberglass
          Wheels: Foam, main 2.75" (70mm) diameter, 1" (25.4mm) diameter
            tailwheel
          Wheel Pants: Painted fiberglass
          Engine Mount: Two-piece composite
          Fuel Tank: Approximately 10oz (300cc)
          Spinner: White plastic 2.25" (58mm) diameter
          Building Time: Ready to fly in several hours
          Warranty: Great Planes Model Manufacturing Company guarantees this
            kit free from defects in both materials and workmanship at
            the date of purchase.

INCLUDES: Great Planes Reactor Bipe Sport 3D Airplane, canopy, decals, fuel
            tank, 2-pc engine mount, wheels, all hardware and instruction
            manual

REQUIRES: Radio: 4-5 channel
          Servos: 7-8 mini servos, 1 standard servo for throttle if using glow
            engine (cutouts in fuselage for elevator and rudder servos can be
            enlarged to accept standard size servos)
          Aileron Servo Extensions: Four 6" (152mm), One 12" (305mm) Three dual
            servo connectors
          Elevator and Rudder Servo Extensions: Three 16" (406mm) and Three
            24" (609mm)
          Engine: .61 cu in (10cc) 2-stroke OR .70-.91 cu in (11.5-15.0cc)
            4-stroke OR
          Electric Motor: RimFire .80 (50-55-500kV) with Silver Series 60A ESC
          Battery: 11.1V 3200mAh (3S) 20C LiPo
          Battery Charger: LiPo compatible

SPECS:    Top and Bottom Wingspan: 48" (1220mm)
          Wing Area: 1145 inē (73.9dmē)
          Weight: 7-7.5 lb (3170-3400 g)
          Wing Loading: 14-15 oz/ftē (43-46 g/dmē)
          Length: 58.5" (1485 mm)
          Airfoil: Semi symmetrical
          Center of Gravity: 5.25" (133mm) from the leading edge of the middle
            of the top wing
          Control Throws: Low Rate           High Rate           3D
           Elevator: 7/8" (22.2mm) 13°  1-3/8" (35mm) 20°    2-3/4" (70mm) 43°
           Rudder: 2-1/4" (57mm) 18°    3-1/2" (89mm) 29°    5"    (127mm) 44°
           Ailerons: 3/8" (9.5mm) 6°      7/8" (22.2mm) 13°  1-1/2" (38mm) 24°

COMMENTS: Following are the Top Flite MonoKote colors used to cover this model
           and order numbers for six foot rolls;
             White: TOPQ0204             Metallic Blue: TOPQ0402
             Orange: TOPQ0202            Aluminum: TOPQ0205

          If a replacement fuel tank is needed, order the Sullivan 10oz
            Flextank (SULQ1728), or the DuBro 10oz tank (DUBQ0210).
            Some minor trimming and modifications may be required.

                                                                    jxs 6/04/09
                                                                         ir/jxs



– If you need more information, use these Great Planes resources –

Click Here: Manufacturer's Product Web Page
E-mail: airsupport@greatplanes.com
Web Site: http://www.greatplanes.com/
Phone: 217-398-8970


 
Postal Address:
Great Planes
3002 N. APOLLO DRIVE, SUITE #1
CHAMPAIGN, IL 61822  








Click here for Units of Measure Conversion Calculators