This is the ElectriFly 11.1V 3200mAh 20C BP Series Battery.
FEATURES: Ideal for bigger sport aerobats and 3Ds, scale, bigger helis and
bigger electric flight
INCLUDES: ElectriFly 11.1V 3200mAh 20C BP Series Battery
REQUIRES: Cell Balancer (like the ElectriFly Equinox LiPo Balancer
GPMM3160 or a charger with balancing capabilities)
SPECS: Capacity: 3200mAh
# of Cells in Series: 3
Rated Voltage: 11.1V
Max. Charge Voltage: 12.6V
Min. Discharge Voltage: 8.25V
Maximum Recommended Charge Current: 3.2 amps (1C)
Continuous Discharge Current: 64 amps (20C)
Discharge Lead: 12AWG 80 mm long wire w/Deans Ultra Female plug
Charge Lead: 24 AWG 20mm long wire w/ElectriFly balance connector
Pack Dimensions: 155 x 45 x 24mm (6.1 x 1.8 x 0.9")
Weight: 285 g (10.1 oz)
COMMENTS: READ the ENTIRE instruction sheet included with battery before use
ALWAYS use a -approved Charger
ALWAYS use a Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents greater than 1C
NEVER Charge through the "To ESC or "DISCHARGE" lead
NEVER Trickle Charge
NEVER allow to Discharge below 2.5V per cell
NEVER disassemble or modify pack wiring in any way or puncture cells
NEVER place on combustible materials or leave unattended during
Charging
ALWAYS charge in a fireproof location
ALWAYS set charger's output volts to match battery volts
ALWAYS keep out of reach of children
jxs 12/03/08
ir/jxs
Click here for Units of Measure Conversion Calculators