This is the 1/8 scale glow powered, radio controlled,
O'Donnell Z01B-SG Off-Road Competition Buggy Kit.
FEATURES: Chassis: Lightweight hard anodized machined 7075 T-6 aluminum, with
carbon-fiber front plate, center diff top plate and servo tray
Drive: Four wheel shaft drive with steel universal CV joints, CVA
axles with large 3mm crosspin
Engine Mount: Aluminum heatsink type
Fuel Tank: Race legal 4.2oz (125cc), with splash guard, two high-
volume fuel filters
Clutch: Three aluminum shoes, 16 tooth steel clutch bell
Transmission: Single speed
Battery Box: Compact design with separate lids for LiPo and NiMH
batteries, separate receiver box
Ball Bearings: Full set included, rubber sealed
Shocks: Four oil-filled Big Bore with 4mm diameter shafts, CNC
machined and lightened aluminum shock towers
Main Gear: 48 tooth
Gearbox: Sealed front and rear
Differentials: Planetary geared, with sintered metal gears
Brakes: Dual disk with adjustable bias, oversized front disc, heat-
treated hardware, extra thick brake and no-drag brake pad springs
Wheels: Lightweight 1.7" (43mm) wide, 3.3" (83mm) diameter, 17mm hex
white in color, wheels meet all maximum allowed legal diameter and
width limits for IFMAR and ROAR competition
Body: Clear, polycarbonate with white molded rear wing
Wing: Molded nylon with extended mount for improved stability
Bumpers: Front nylon bumper
Suspension: Independent front and rear with pivot-mount suspension
arm mounts, 7075-T6 billet aluminum torsional front torque rod,
7075-T6 rear torque rod with glass filled rod ends
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Steering: Redesigned Ackerman steering rack, Ackerman refers to the
inside front wheel turning faster than the outside front wheel
during turns
INCLUDES: O'Donnell glow powered Z01B-SG Buggy Kit, low profile air filter,
16 tooth clutch bell, 48 tooth spur gear, instructions, body, wing,
transponder mount, diff oil, wheels, decal sheet and instructions
REQUIRES: Radio: 2-3 channel
Radio Batteries: (8) AA size
Engine: .21 cu in (3.4cc) racing engine
Exhaust System: Tuned pipe and header
Tires: 1/8 scale racing type with foam inserts
Glow Starter: 1.2 volt
Shock absorber oil
Paint: Spray or brush-on polycarbonate safe for body
Misc. Items: Fuel bottle, building and track equipment
Fuel: 2-cycle glow fuel with 20%-30% nitromethane, 16% lubricant-
Most of the fuels we carry meet or exceed the lubricant content
required for optimum performance and maximum engine life. In the
past, the conventional lubricant content used in fuel was 18%. But
with new advanced technologies, fuels like O'Donnell and Red Alert
for example, have a better quality of lubricants even though the
percentages of lubricant content are lower. These high-tech
lubricants provide exceptional cooling and protection.
SPECS: Vehicle-
Length: 20" (510mm)
Width: 12" (305mm)
Height: 7.5" (187mm)
Weight: 7lbs (3175g) approx.
Wheelbase: 13" (330mm) adjustable, wheels on center front-to-
rear
Front Track: 10.25" (260mm)
Rear Track: 10.5" (275mm) outer edges of wheels side-to-side
Gear Ratio: 4.3:1
Body-
Length: 14.5" (368mm)
Width: 7.3" (186mm)
Height: 4" (102mm)
COMMENTS: For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
3 8x16mm Rear Diff 2 ODOC1550
3 8x16mm Spur/Diff Gears 2 ODOC1550
2 8x16mm Rear Diff Joint 1 ODOC1550
4 8x16mm Rear Outdrives 2 ODOC1550
2 8x16mm Front Diff 1 ODOC1550
4 8x16mm Front Hubs 2 ODOC1550
4 6x10mm Steering Assembly 2 ODOC1555
2 5x10mm Clutch 1 ODOC1560
2 5x8mm Brake Cam 1 ODOC1565
jxs 03/25/10
ir/jxs
Click here for Units of Measure Conversion Calculators
| 
E-mail This Page To A Friend
Primary Accessories
Primary Accessories
