Master Airscrew Injection Molded Fiberglass Filled Nylon Propellers and
Excellent for any Type of Application, from Training and
Sport Flying to Serious Competition.
FEATURES: Factory Balanced 3-Bladed Props have NACA airfoils and hold a
true pitch.
They have been accurately balanced and create a greater thrust
at a lower RPM.
This particular prop is glass-filled nylon as opposed to a wooden
prop.
INCLUDES: One 11x8 glass-filled nylon 3-bladed propeller
SPECS: Diameter: 11"
Pitch: 8"
COMMENTS: The general rule for converting a 2 blade prop to a 3 blade is
subtract 1" from Diameter OR subtract 1 from the Pitch.
PER MASTER AIRSCREW: All 3- and 4- blades props are balanced
dynamically at the factory prior to drilling. The mounting holes
are then drilled slightly off center, if required, to properly
balance the propeller. As such, your mounting hole may be slightly
off center. Master Airscrew assures us this is perfectly normal
and will not cause any problems during usage.
ir/jl
– If you need more information, use these Master Airscrew resources – |
Web Site: http://www.masterairscrew.com/
Phone: 916-631-8385
|
|
Postal Address:
Master Airscrew
MASTER AIRSCREW/WINDSOR PROPELLER
PO BOX 250
RANCHO CORDOVA, CA 95741
|
Click here for Units of Measure Conversion Calculators
| 
Yes
E-mail This Page To A Friend
