Instruction Manuals:	Manual 1 (309 KB) Manual 2
Tower Catalog Page:	63
E-mail This Page To A Friend

          This is an All-Wood Spectra ARF Glider (Sailplane) Kit.
        Expertly Factory-Covered in Genuine Top Flite MonoKote Film.
            The wing is Shaped to Increase Stability, Making the
      Spectra as Suitable for Entry-Level Pilots as Experienced Fliers.

*****The information on the box indicates that a speed control and battery*****
******are included. This is incorrect, these are not included and MUST be******
****************************purchased separately.******************************

FEATURES: Expertly factory-covered in genuine Top Flite MonoKote film.
           Sapphire Blue TOPQ0226   Black     TOPQ0208   Orange     TOPQ0202
           Missile Red   TOPQ0201   Jet White TOPQ0204   Cub Yellow TOPQ0220

          Can be ready to fly in as little as two hours.
          Comes with an ElectriFly T-601 motor.
          The slide together wing (no glue required) and bolt-together tail
            reduce building time and simplify assembly. Wing also has an
            aluminum reinforced joiner for extra stability.
          Tail assembly is quick, easy, and self-aligning. The horizontal
            stabilizer slides into a slot at the back of the fuselage. The
            vertical stabilizer plugs in from the top & secures with two bolts.
          Spectra wing's modified Selig 3010 airfoil, low wing loading, triple
            taper platform and polyhedral shape combine for excellent stability
          Includes tinted canopy, with easy lift-off access to on-board gear
            and has a high-tech NACA style vent for cooling.
          Bold stripes on bottom side of wing aid in quickly identifying
            flight orientation.

INCLUDES: One Each, Pre-Covered Left and Right Wing, Fuselage, Horizontal and
            Vertical Stabilizer; Smoked Plastic Canopy, T-601 ElectriFly motor,
            folding Prop,  Wing Joiners, Pushrods, Hardware and
            Illustrated Instruction Manual. (hardware is metric)

SPECS:    Wingspan: 78.5" (1995mm)     Wing loading: 10.6 oz/sq ft (32g/sq dm2)
          Wing Area: 676 sq in (43.6sq dm)   Aspect Ratio: 9:1
          Weight Range: 50oz (1415g)         Length: 41.5" (1055mm)
          Dihedral: 4-3/8"             Wing Loading: 10.7 oz/sq ft (33 g/sq dm)
          Throws: Ele  ½" up & down         CG: 3-1/8" aft of LE @ fuse
                  Rud 1½" left & right

REQUIRES: 3-4 Channel Radio
          2 Mini or Standard Servos (1-Elevator, 1-Rudder)
          Electronic Speed Control (GPMA2345)
          Battery Pack (GPMP0361)
          Deans Male to Standard Adapter (GPMM3131) needed if battery listed
            above is used
          Building Equipment (glues, hobby knife, sandpaper, tools)

COMMENTS: Only one receiver is required depending on the channel of the
            radio selected(Low band Ch 11-35, High band Ch 36-60). Please note
            the Accessory Completion Guide lists both Low and High band
            receivers. Channel selection is left to the modelers preference.

          It is recommended to use ONLY the suggested battery with this kit

                                                                    kzh10-19-01
                                                                          ir/kh
                                                                upd NNA 8/28/03
                                                               updt jxs 1/02/04
                           MonoKote colors checked & matched updated tjt 022305



– If you need more information, use these Great Planes resources –

Click Here: Manufacturer's Product Web Page
E-mail: airsupport@greatplanes.com
Web Site: http://www.greatplanes.com/
Phone: 217-398-8970


 
Postal Address:
Great Planes
3002 N. APOLLO DRIVE, SUITE #1
CHAMPAIGN, IL 61822  








Click here for Units of Measure Conversion Calculators