E-mail This Page To A Friend

         This is the Radio Controlled, Glow Powered, Balsa and Plywood
             House of Balsa Chea-Pass Float Plane .10 Airplane Kit.
           This kit consists of pre-cut wood only, all items such as
                 the engine mount, connectors, linkages, and
                assembly hardware must be purchased separately.
                 For Intermediate to Advanced Modeler/Flyers.

FEATURES: Easy interlocking balsa and plywood construction, with built-in
            thrust angles and a wing that assembles flat on die-cut ribs.
          Wings are one-piece, all wood designed for single aileron servo
            control.
          Spacious radio compartment allows easy radio gear installation and
            quick fuel tank access.

INCLUDES: One House of Balsa Chea-Pass Float Plane .10 Airplane Kit with all
            balsa and plywood to construct the airplane, glass tape to join
            wing halves, wood dowels, instruction sheet, two steel wires and
            two brass tubes for aileron linkage.

REQUIRES: Engine:  .09-.12 (1.5-2.0cc) (2-stroke)
          Radio:   4 channel
          Servos:  4 micro servos (1-throttle, 1-aileron, 1-rudder, 1-elevator)
          Misc. Items: 1-1/2" spinner, 2-3oz fuel tank, 1/4" foam rubber
            padding, fuel tubing, fuel filter, propeller, CA glue, engine mount
            and blind nuts, control horns, hinges, throttle cable, covering,
            aileron hinges and building and field equipment.

SPECS:    Wingspan:     45.5" (1156mm)
          Wing Area:    318 sq in (20.51 sq dm)
          Weight:       2 lb (907.2 kg)
          Wing Loading: 14.5 oz/sq ft (44.24 g/sq dm)
          Length:       31" (787mm)
          Airfoil:      Semi-Symmetrical (High Wing)
          Center of Gravity: 1-3/4" (44mm) Back from the wing's leading edge
            at the fuselage sides.
          Control Throws-
            Ailerons:  up-3/16" (4.5mm)  down-1/8" (3mm)
            Elevator: up & down    3/8" (19mm)
            Rudder: right & left   5/8" (11mm)
                                                                    JXS 6/28/01
                                                                          ir/jl



– If you need more information, use these House of Balsa resources –

E-mail: HOBANDZAP@aol.com
Web Site: http://www.houseofbalsa.com
Phone: 760-246-6462


 
Postal Address:
House of Balsa
10101 YUCCA ROAD
ADELANTO, CA 92301  








Click here for Units of Measure Conversion Calculators