View Larger Picture

Parts Express Eligible:	Yes
Tower Catalog Page:	184
E-mail This Page To A Friend

  This is a R113iP 3-Channel 75MHz Micro PCM1024 Receiver "Without Crystal".
       This is a receiver without a crystal (see REQUIRES and COMMENTS).

FEATURES: Narrow-band spacing and superior signal filtering combined to
            provide exceptionally clear, interference-free reception and
            amazingly smooth, accurate control.

INCLUDES: One R113IP 3-Channel 75MHz Micro PCM1024 Receiver

REQUIRES: One FUTL64** Receiver Crystal
          Or a Futaba Single conversion crystal such as FUTL52**.

SPECS:    Narrow Band: 20kHz
          Intermediate Frequency: 455kHz
          Power Requirements: 4.8 to 6.0V (shared with servos)
          Current Drain: 18mA
          Length:  1.69" (42.7mm)
          Width:   1.13" (28.7mm)
          Height:  0.63" (16.0mm)
          Weight: 0.74oz (21g)

COMMENTS: For the transmitter/receiver crystal set, use FUTL97**.

          Special Notice about Frequency Changes-
          *72MHz- Low band channels 11 to 35; High band channels 36 to 60.
             Receiver crystal channels (11-35 or 36-60) Within Each Band
             Can Be Changed, and Do Not Require a retuning of the receiver.
          *72MHz Frequency Band (Low or High) for the receiver Can Not Be
             Changed from Low to High band, OR from High to Low band without
             sending it into Futaba Services for retuning.
          *50MHz, 72MHz, 27MHz and 75MHz Frequency Bands Can Not under any
             circumstances be interchanged with each other. The receiver Must
             be sent in for retuning to the appropriate band.
          *50MHz, 27MHz and 75MHz receiver crystals Can be changed anywhere
             within the respective bands. There are no High or Low bands such
             as the 72MHz band has.
          *Transmitter Crystals Can Not be changed to another channel except
             by a licensed service center. It is against FCC regulations, and
             illegal for the user to change a frequency determining component
             of a transmitter. If the radio is not retuned, it can be a hazard
             spectators, modelers or property, and void AMA insurance coverage.
          *Check with the local R/C club for the frequencies used in your area.

                                                                    JAL 8/27/01
                                                                          ir/jl
                                                            updated jpg 7/21/05




– If you need more information, use these Futaba resources –

Click Here: Manufacturer's Product Web Page
E-mail: support@futaba-rc.com
Web Site: http://www.futaba-rc.com/
Phone: 217-398-8970


 
Postal Address:
Futaba
3002 N. APOLLO DRIVE, SUITE #1
CHAMPAIGN, IL 61822  








Click here for Units of Measure Conversion Calculators