Shipping Note:	Flammable, cannot be shipped via Air
E-mail This Page To A Friend

                        This is a 1 oz glass jar of
                    Balsa Fillercoat Primer from Midwest.
    The original hot fuel proof butyrate dope system which gives a durable,
          fast-drying, lightweight and beautiful lacquer-type finish.

FEATURES: Use over balsa or grainy wood to seal grain.  Dries white.
          Used for Tissue Covered Aiplane Models, Control Line Airplane Models,
            R/C Airplane and Boat Models, Wood Scouting Projects and Model
            Rockets.
          For use on paper, fabric coverings, balsa and basswood.
          Contains no lead.

INCLUDES: One 1 oz glass jar of Balsa Fillercoat Primer

REQUIRES: Use in a well ventilated area with lung, eye and skin protection.
          Brush to apply Balsa Fillercoat to the model.

SPECS:    Fluid Ounce: 1 oz (29.5 mL)
          Fuel Proof: No, Do Not use as a final coat.

COMMENTS: Flammable: Contains toluol and methyl ethyl keytone.
          As with any type of painting procedure, always test for compatibility
            of materials on a scrap piece before attempting to paint model.
          For best results:  1. Sand entire model until smooth surface is
            obtained by using progressively coarse to fine sandpaper.
            2. Fill in any minor surface irregularities with Aero-Gloss Balsa
            Fillercoat Primer.  Use Plastic Balsa Wood Putty for larger
            irregularities.  Stir Balsa Fillercoat Primer thoroughly.  Apply
            with brush.  Let dry 24 hours before sanding.
            3. Fine sand entire model.  Lightly wipe off dust with tack rag.
            4. Lightly wipe entire model with damp sponge to raise wood grain.
            Once dry, fine sand and wipe clean.
            5. Model surface is now properly prepared for paper or fabric
            covering material, or for surface sealing/priming with Aero-Gloss
            Sanding Sealer if model is to be painted.
                                                                     JAL 1/2/00
                                                                          ir/jl




– If you need more information, use these Midwest resources –

E-mail: customerservice@midwestproducts.com
Web Site: http://www.midwestproducts.com/
Phone: 800-348-3497


 
Postal Address:
Midwest
PO BOX 564
HOBART, IN 46342  








Click here for Units of Measure Conversion Calculators