Parts Express Eligible:	Yes
Tower Catalog Page:	190
E-mail This Page To A Friend

             This the Hitec Super Thin Digital Wing servo with a
          Universal Futaba J, Hitec S, JR and Airtronics Z Connector.
                These servos are used in confined spaces where a
                   thin or low profile servo might be required.

FEATURES: Digital and MOSFET Amp
          Indirect Drive Potentiometer for longer life
          Dual ball bearing
          Gold plate connector
          Narrow dead band width and high standing torque
          Strong four metal gears and one plastic gear
          One metal servo horn
          Plastic hardware servo horns and screws
          Hitec "S" connector
          Instruction sheet

INCLUDES: One digital servo
          Hardware

REQUIRES: Hitec receivers

SPECS:    Length: 1.18"(30mm)
          Width:  1.33"(34mm)
          Height: .39" (10mm
          Weight: 24g (.84oz)
          Output speed: .17 sec 60 degrees at 4.8V
          Output torque: 41.66 oz-in (3 kg-cm) at 4.8V
          Pulse data: 3-5V peak to peak square wave pulse. Pulse duration
           is from 0.9mS to 2.1mS with 1.5mS as center.
          Pulse refreshes at 50Hz (20mS)
          Voltage range: 4.8-6V
          Wire color: Black is Ground, Red is center, Power, third wire is
          Signal
          Direction rotation: Hitec servos turn in a clockwise direction

COMMENTS: Servo will work in gliders or wings, or any thin aircraft wing.
                                                                    dew 5/02/02
                                                                          ir/kh
                                                               updt jxs 2/13/06



– If you need more information, use these Hitec resources –

E-mail: service@hitecrcd.com
Web Site: http://www.hitecrcd.com/
Phone: 858-748-6948


 
Postal Address:
Hitec
12115 PAINE STREET
POWAY, CA 92064  








Click here for Units of Measure Conversion Calculators