E-mail This Page To A Friend

           This is a Functioning Main Landing Gear Set by Robart
                          for a 1/5 Scale Cub

FEATURES: Steel Construction
          Functioning Sring Action using Rubber Washers

INCLUDES: One Right Hand Frame
          One Left Hand Frame
          One Cross Brace
          Two Lower Braces
          Two Upper Braces
          Four Mounting Brackets
          Four Clevis Pins
          Eight E-Clips
          Four Rubber O-Rings
          Two 8-32x3/16" Set Screws
          Two 3/16" Axles
          Eight 6-32x5/8" Slotted Round Head Screws
          Eight 6-32" Blind Nuts
          Four 4-40x5/8" Cap Screws
          Two 4-40x3/8" Cap Screws
          Six 4-40 Lock Nuts

REQUIRES: 1/5 Scale Airplane with 5 1/8" Wide Fuselage

SPECS:                      Mounting                   Overall
          Length:           92.3mm  (3.75")           104.8mm (4.125")
          Width:            129.0mm (4 5/64")         381.0mm (15")

          Height:           n/a                        108.0mm (4.25")
          Tube Diameter:    n/a                        6.35mm  (0.25")
          Weight:           n/a                        230 grams (8.11 oz)

                                                                   jmm 12/17/01
                                                                          ir/kh



– If you need more information, use these Robart resources –

E-mail: robart@robart.com
Web Site: http://www.robart.com/
Phone: 630-584-7616


 
Postal Address:
Robart
625 N. 12TH STREET
ST. CHARLES, IL 60174  








Click here for Units of Measure Conversion Calculators