E-mail This Page To A Friend

       This is a Control Master 20 High Power Train Controller from MRC.
           It is not recommended for children under 12 years of age.

     When a real locomotive is given a throttle increase there is a lagtime or
delay until the preselected speed is reached. Likewise, when braking a
lifesize, fast moving train, it usually takes a mile or so before it stops.
But because lightweight model trains won't mimic this delay on their own, MRC
has created the momentum or inertia electronically. When you increase throttle
position on a momentum-equipped power pack, or operate the brake, a delay
circuit slows the rate of track voltage change. This power pack is equipped
with a switch to bypass momentum circuitry for yard work or switching which
requires quick throttle reaction.

FEATURES: Massive, controlled power available to fulfill the high demand
            requirements of sophisticated layouts.
          Walkaround hand held control with memory. Unplug the controller from
            telephone jack, move to a new section, and the train continues
            to run at the same speed as when it was unplugged.
          High efficiency, advanced state of the art switching circuit
            technology.
          Filtered and regulated DC output.
          Unique push button braking control in hand held controller designed
            for left or right handed operators.
          Mode switch for either large scale operation or for HO, N, and other
            DC operated trains.
          Easy on terminals - no need for crimping or soldering.
          300 degree speed control of throttle allows three times the control
            arc of ordinary power packs.
          LEDs (Light Emitting Diodes) for an overload indicator.
          Main line direction switch for quick and easy reversing.
          Circuit protector in case of overloads.
          Master ON/OFF switch.

INCLUDES: One Control Master 20 High Power Train Controller

REQUIRES: Installation with Selected Train Set
          120V AC Outlet (US Standard Outlet)
          Flathead Screwdriver
          Adult Supervision

SPECS:    Mode I Output:  0-20VDC 65VA Max, 16VAC; Total Output: 85VA
          Mode II Output: 0-14VDC 56VA Max, 16VAC; Total Output: 75VA
          Length: 11-1/4" (284mm)
          Width:  7-1/2"  (192mm)
          Height: 3-1/2"  (90mm)

COMMENTS: As with all electrical products, precautions should be observed
            during handling and use to reduce the risk of electric shock.
                                                                    san 9/27/00
                                                                          ir/jl



– If you need more information, use these MRC resources –

E-mail: mrcsupport@modelrectifier.com
Web Site: http://www.modelrec.com/
Phone: 732-225-6144


 
Postal Address:
MRC
PO BOX 6312
EDISON, NJ 08818  








Click here for Units of Measure Conversion Calculators