Parts Express Eligible:	Yes
E-mail This Page To A Friend

               This is the Ofna Purple Aluminum CNC Servo Arm.
    This Arm replaces the stock plastic arms supplied with many servos.

FEATURES: Constructed from machined aluminum for strength and light weight.
          Fits any servo with a 0.22" (5.5mm) diameter output shaft
          Two holes drilled at outer end for different linkage movements.

INCLUDES: One Ofna Purple Aluminum CNC Servo Arm with one arm and three 5.5mm
            servo shaft adapters.

REQUIRES: Pressing over servo output shaft and fastening with one 2.5mm x 8mm
            phillips head screw (not included), must reuse screw included with
            servo or purchase FUTM2260.

SPECS:    Length:    1.07"  (27.2mm)
          Width:     0.35"  (9mm) at outer end
          Thickness: 0.078" (2mm)

COMMENTS: Some servos this Arm will fit include but are not limited to:
            Hitec HS-303, Tower Hobbies TS-65, TS-71, TS-35, Hobbico CS-61,
            CS-35, and Duratrax SX-210MG, SX-205.
          Will NOT fit Futaba S3003, S9253, S9202, S9204, or S3401.
                                                                     JXS 4/3/02
                                                                          ir/kh



– If you need more information, use these Ofna resources –

E-mail: help@ofna.com
Web Site: http://www.ofna.com/
Phone: 949-586-2910


 
Postal Address:
Ofna
7 VANDERBILT
IRVINE, CA 92618  








Click here for Units of Measure Conversion Calculators