Parts Express Eligible:	Yes
Tower Catalog Page:	94
E-mail This Page To A Friend

              This is an 18x10 Composite Propeller from APC.

FEATURES: APC props are manufactured using a pultrusion process. This method
            causes the fiberglass "fibers" to be oriented axially in 1/2" long
            pellets, allowing for a higher fiber (60%) to resin (nylon binder)
            density. Providing substantially higher strength and stiffness than
            glass filled nylon.
          The additional stiffness is beneficial to control of vibration
            resonance response.
          The higher strength allows the use of thinner cross-sections,
            beneficial to weight and aerodynamic efficiency.
          Competition proven.
          Dark gray composite material.
          Single piece propeller.

INCLUDES: One 18x10 APC Composite Propeller.

REQUIRES: ALL props require balancing (use TOPQ5700).
          May need prop reamer, use GPMQ5005 (SAE) or GPMQ5007 (Metric).
          9/32" + 5/16" Tubing for Bushing

SPECS:    Prop Diameter: 18"
          Prop Pitch:    10
          Hub Thickness: 0.40"
          Hub Diameter:  0.8"
          Weight:        0.047lbs
          Engine Shaft Diameter: 1/4"
                                                                    sdw 4/22/02
                                                                          ir/kh



– If you need more information, use these APC resources –

Web Site: http://www.apcprop.com/
Phone: 530-661-0399


 
Postal Address:
APC
PO BOX 938
1222 HARTER AVE
WOODLAND, CA 95776  








Click here for Units of Measure Conversion Calculators