E-mail This Page To A Friend

       This is the Hitec Laser 4 Channel FM Radio Control System with
                              Two HS-322 Servos.
               This Radio System replaces the Focus 4 series.
      This 75MHz surface version uses the same transmitter with mixing
     functions as the 72MHz system but is intended for surface use only.

FEATURES: Channel 1 and 2 elevon mixing option.
          Channels 2 and 4 V-tail mixing option.
          Adjustable Travel Volume (ATV) on Channels 1 and 2 limits or extends
            the maximum servo throw. Rate setting is adjustable from 30%-110%
          Five LED power meter with low battery alarm.
          Trainer jack (trainer cord not included).
          All channel servo reversing.
          Two year warranty.

INCLUDES: One Hitec Laser 4 Channel FM Radio Control System with,
            Two HS-322 Servos with mounting hardware
            Two round, four straight, and two star shaped servo horns,
            One Dual Conversion 8 channel receiver.
            One 4-cell AA battery holder
            One overnight AC charger (HRCP3025).
            One 8-cell, 9.6V 600mAh transmitter battery.
            Screwdriver, frequency flag, ON/OFF switch, foam receiver pad,
              Velcro servo mounting tape, illustrated instructions, warranty
              card.

REQUIRES: Four AA batteries for battery box.
          Installing servos and receiver into model and charging transmitter
            pack. Initial charge should be at least 24 hours to ensure a full
            charge, subsequent charges should be at least 12-20 hours.

SPECS:    Transmitter,
            Power Supply: 9.6V (8 cell) NiCd Battery or 12V 8 cell dry battery
            Current Drain: 150mAh
            Output Power:  500mW
            Modulation:    PPM (FM)
          Receiver, Dual Conversion
            Channels: Eight                    Length: 2.3"  (58mm)
            Frequency: 75MHz                   Width:  1.4"  (36mm)
                                               Height:  .78" (20mm)
                                               Weight: 35g   (1.23oz)
          Servos,
            Weight: 1.75oz (44.5g)             Length: 1.6" (41mm)
            Torque: 42 oz-in (3.0 kg-cm)       Width:  0.8" (20mm)
            Speed:  0.19 sec/60 degrees        Height: 1.4" (36mm)

          Charger,
            Input: 117VAC 50/60Hz 4VA (US Standard)
            Output: Tx, 10.8V DC 55mAh
                    Rx,  4.8V DC 55mAh

          Transmitter Battery,
            Voltage: 9.6V                      Length: 3.86" (98mm)
            Milliamp hour rating: 600          Width:  1.06" (27mm)
            Connector: 2-pin                   Height: 1.06  (27mm)

NOTE:    Ground freq. do NOT include an Rx NiCd per Hitec
                                                                    JXS 5/14/02
                                                                          ir/kh
                                                               updt jxs 4/09/03
                                                          note added tjt 062405



– If you need more information, use these Hitec resources –

E-mail: service@hitecrcd.com
Web Site: http://www.hitecrcd.com/
Phone: 858-748-6948


 
Postal Address:
Hitec
12115 PAINE STREET
POWAY, CA 92064  








Click here for Units of Measure Conversion Calculators