This is the DTX .18 Engine with Rotary and Recoil.
It has the same mounting and muffler dimensions as the OS Max .12CV
2 Year Warranty
FEATURES: ABN construction, Aluminum piston with Brass Nickel-plated
cylinder liner.
Rotary carb
Recoil starter
Ball bearing-supported crankshaft
Heavy duty con rod
Side exhaust
DuraTrax Silver Sport , available separately (DTXG3001)
Natural aluminum (powder coat) 7-fin cylinder head
INCLUDES: One assembled DTX .18 engine with Rotary Carb and Recoil Starter
One set of instructions with parts list
REQUIRES: Muffler (exhaust system) depending on vehicle
Air filter
Fuel filter
Starting equipment
Fuel: 5% - 20% content
SPECS: Displacement: .18 cu in (3cc)
Weight: 8.64oz (245g)
Bore: 16.6mm
Stroke: 13.6mm
Power Output: n/a
Practical RPM: n/a
Ports: Three (2-intake, 1-boost, 1-exhaust)
Crankshaft Thread: 5mm x 14mm
On-Center Mounting Holes, Front to Rear: .43" (11mm)
On-Center Mounting Holes, Side to Side: 1.24" (31.4mm)
On-Center Exhaust Mounting Holes: 1.08" (27.5mm)
Back of engine to front of drive washer: 2.23" (56mm) Excluding Recoil
Height: 3.25" (83.7mm)
High Speed needle: 2½ turns OUT from closed position
Low Speed needle: Screw IN until flush with outside of carb body,
then screw it in ½ turn.
tjt 5/5/2003
ir/jxs
ABN updated cmc 11/19/04
updt jxs 6/22/05
Click here for Units of Measure Conversion Calculators
|