Additional Pictures:	Picture 1
Instruction Manuals:	Manual 1
Tower Catalog Page:	13
E-mail This Page To A Friend

         This is the radio controlled, glow powered, Almost-Ready-to-Fly,
                 Tower Hobbies Voyager MkII .40 sport airplane.

Recommended for intermediate modelers who have had trainer airplane experience.

FEATURES: Construction: Balsa and plywood
          Wing: One-piece all wood
          Covering: Factory applied durable iron-on film, fuselage is White
            with swirls of Red and Blue, wing is Red on top with a diagonal
            Blue and White pattern, rudder and elevator are Red with Blue and
            White pattern
          Radio Compartment: Easily accessible above wing, plywood reinforced
          Cowling: Pre-painted Red, White, and Blue, fiberglass-reinforced)
          Canopy: Clear, single
          Landing Gear: Pre-bent 4mm wire with nose gear
          Aileron Control: Single servo with standard size and torque required
          Wheels: Three, 2¾" (69mm) diameter, constructed of foam
          Engine Mount: Aluminum, non-adjustable
          Building Time: Ready to fly in several hours
          Warranty Period: Tower Hobbies guarantees this kit free from defects
            in both material and workmanship at the date of purchase
            The warranty does not cover any component part damaged by use or
            modification

INCLUDES: Pre-built and covered wings, fuselage and tail assemblies, pushrods,
            pre-bent main landing gear, fiberglass cowl, clear canopy, main and
            nose gear wheels, aluminum engine mount, 9.1oz (270mm) fuel tank,
            plywood servo trays and wing joiners, 2" (51mm) spinner, decal
            sheet with instrument panel decal, hardware package, paintable two-
            piece pilot head, and photo-illustrated instructions.

REQUIRES: Engine: .40 -.46 cu in (6.5-7.5cc) 2-stroke
          Muffler: Muffler type supplied with engine
          Radio: 4-channel
          Servos: 4-standard (1-Aileron, 1-Elevator, 1-Throttle, 1-Rudder)
          Servo Extension: 6" (152mm) for aileron servo
          Misc. Items: Glow plug, ¼" foam rubber padding, medium fuel tubing,
            fuel filter, propeller, building and field equipment.

SPECS:    Wingspan:  59.5" (1510mm)
          Wing Area:    602 sq in (38.8 sq dm)
          Weight:       5.1lb (2310g)
          Wing Loading: 19.4 oz/sq ft (59 g/sq dm)
          Length:       46.8" (1190mm)
          Airfoil: Semi-symmetrical, low-wing
          Center of Gravity: 3-1/4" (83mm) Back from the wing's leading edge
          Control Throws-          High Rate        Low Rate
            Elevator: Up & Down    9/16"  (14mm)   3/8" (9.5mm)
            Rudder: Right to Left 11/16"  (19mm)   1/2"  (13mm)
            Ailerons: Up & Down     3/8" (9.5mm)  3/16"   (5mm)

COMMENTS: If a replacement fuel tank is needed, order the Sullivan 8oz
            tank (SULQ1739), or the DuBro 8oz tank (DUBQ0208). These tanks are
            1oz smaller than the one supplied with kit.
            Some minor trimming and modifications may be required.

                                                                    jxs 8/29/03
                                                                         ir/jxs



– If you need more information, use these Tower Hobbies resources –

Click Here: Manufacturer's Product Web Page
E-mail: info@towerhobbies.com
Web Site: http://www.towerhobbies.com/
Phone: 217-398-8970


 
Postal Address:
Tower Hobbies
PO BOX 9078
CHAMPAIGN, IL 61826  








Click here for Units of Measure Conversion Calculators