This is Great Planes 5-Channel High Band 72MHz FM Receiver w/ESC.
Combining a fully porportional 30A ESC with brake and a 5 channel receiver in
the same package greatly reduces overall size and weight of
on-board components.
** Compatible with Futaba, Hitec, AND JR and Airtronics. **
Perfect for the Park Flyer Planes.
This receiver will AUTOMATICALLY select the appropriate transmitter type.
No need to purchase a receiver depending on what transmitter you have.
You must purchase a Short Crystal (GPML20**) to use with this receiver
One Year Warranty
FEATURES: Small and lightweight at only 1.05oz (30g) (w/o crystal) which is
CRITICAL for park flyers.
Accepts only Futaba brand single conversion 72mHz crystals.
(Not included)
Tuned to either Low band (11-35) or High band (36-60)
Perfect for small Electric Indoor or park flyer models, or .25 size
nitro planes.
Approximately 890 feet of Maximum range.
Excellent sensitivity and noise filtering for precise control and
glitch free operation.
Fully porportional ESC with forward and brake, for 400, 500, and
600 size motors.
Smooth response without noticeable steps.
Has audible set up "tones", not a visible LED indicator.
Pre-installed Standard battery connector.
INCLUDES: One 5-Channel High Band 72MHz FM Mini Receiver w/ ESC
REQUIRES: One GPML20**
SPECS: Single Conversion Narrow Band
Current Drain: 12mA (no servo load)
Length: 1.24" (36mm)
Width: .71" (18mm)
Height: .59" (15mm)
Weight: 1.05oz.(30g) (without crystal)
Input Power: 3.0-10.V DC
Intermediate frequency: 455kHz
Sensitivity: 3.0 micro-volts
Selectivity: 6dB @ +/- 3kHz
ESC SPECS:
Max Rated Current: 30 AMPS
BEC Voltage: 5V/1.5A
Low Voltage Cut off: 4.8V
Battery Plug: Standard Type
Switching Freq: 1.5KHz
COMMENTS: Special Notice about Frequency Changes-
*72MHz- Low band channels 11 to 35; High band channels 36 to 60.
Receiver crystal channels (11-35 or 36-60) Within Each Band
Can Be Changed, and Do Not Require a retuning of the receiver.
*72MHz Frequency Band (low or high) for the receiver Can Not Be
Changed from low to high band, OR from high to low band without
sending it into Futaba Services for retuning.
*50MHz, 72MHz, 27MHz and 75MHz Frequency Bands Can Not under any
circumstances be interchanged with each other. The receiver Must
be sent in for retuning to the appropriate band.
*50MHz, 27MHz and 75MHz receiver crystals Can be changed anywhere
within the respective bands. There are no high or low bands such
as the 72MHz band has.
*Transmitter Crystals Can Not be changed to another channel except
by a licensed service center. It is against FCC regulations, and
illegal for the user to change a frequency determining component
of a transmitter. If the radio is not retuned, it can be a hazard
to spectators, modelers or property, and void insurance coverag
*Check with the local R/C club for the frequencies used in your area
kh06-12-02
**Dimensions updated 11-19-02 by RJM as per P.M. MCW 5/19/03
updt jxs 2/18/04
updt jxs 5/21/04
Click here for Units of Measure Conversion Calculators
|