Tower Catalog Page:	203
E-mail This Page To A Friend

This is a .32 2-Stroke Airplane ABC Engine w/ Front Mounted Needle Valve
                                from GMS.

FEATURES: Ball bearing-supported crankshaft
          Front mounted High Speed needle valve
          Low Speed needle-equipped carburetor
          Aluminum Brass Chrome piston/sleeve construction
          Adjustable exhaust outlet on muffler allows 360° rotation of
            muffler tip
          Gold anodized heatsink head
          One-piece crankcase with a bead-blasted finish
          2 year warranty on all GMS engines

INCLUDES: One .32 ABC airplane engine
          One bolt-through muffler
          One carburetor
          One muffler gasket
          One glow plug
          Two allen key tools
          Two muffler screws
          One manual and parts list

REQUIRES: Attaching carburetor and muffler.
          10-15% airplane nitro fuel.
          8x6 size propeller for break-in

SPECS:    Displacement: .32 cid (5.20 cc)
          Bore: 19.8mm
          Stroke: 17.0mm
          Output: 1.2 BHP at 18,000 RPM
          Practical range: 2,000 - 20,000 RPM
          Weight: 10.76oz (305g) with muffler

          Center distance width across mounting holes:           1.5" (38mm)
          Center distance length of mounting holes on same side: 0.59"(15mm)
          Length from front of crankcase to backplate screws:    2.7" (69mm)
          Width across mounting flanges: 1.7"  (45mm)
          Total height of engine:        3.02" (76.8mm)
          Length from center of head to front of crankcase: 1.9" (48mm)
          Widest width of crankcase neglecting mounting flanges: 1.2" (30mm)
          Length from front of crankcase to center distance of front
            mounting hole: 1.5" (39mm)
          Height from crankshaft center to top of head: 2.4" (61.8mm)
          Crankshaft thread size: 1/4-28

          Factory Settings:
             High speed: 1½ turns OUT
             Low end: 2mm gap
             Idle speed: N/A- adjusted through throttle

COMMENTS: Recommended propeller sizes: 8x6-9x6
          For the GMS .32 engine with remote mounted needle, use GMEG1132.
          To convert to a remote needle use GMEG7255 & GMEG7355

          All GMS engines use the same owner's manual
       If using the Slimline Pitts (SLIG2216) one must use the screws supplied
       with the muffler.
       For Bisson Pitts use screws supplied with engine.

                                                                   cmc 07/31/03
                                                                         ir/jxs
                                                               updt lmm 3/27/09



– If you need more information, use these GMS Engines resources –

Click Here: Manufacturer's Product Web Page
Phone: 217-398-8970


 
Postal Address:
GMS Engines
1610 INTERSTATE DRIVE
CHAMPAIGN, IL 61822  








Click here for Units of Measure Conversion Calculators