Tower Catalog Page:	203
E-mail This Page To A Friend

 This is a .32 2-Stroke Airplane ABC Engine w/ Remote Needle Valve from GMS.

FEATURES Low speed needle-equipped carburetor with High Speed Needle Valve
            mounted on the backplate to reduce chance of injury from spinning
            propeller
          Aluminum Brass Chrome piston/sleeve construction
          Adjustable exhaust outlet on muffler allows 360° rotation of
            muffler tip
          Gold anodized heatsink head.
          Ball bearing-supported crankshaft
          One-piece crankcase with a bead-blasted finish
          2 year warranty on all GMS engines

INCLUDES: One .32 cid (5.20cc) airplane engine
          One bolt-through muffler
          One carburetor
          One muffler gasket
          One glow plug
          Two allen key tools
          Two muffler screws
          One manual and parts list

REQUIRES: Attaching high speed remote needle valve and muffler.
          5-15% airplane nitro fuel.
          8x6 propeller for break-in

SPECS:    Displacement: .32 cid (5.20cc)
          Bore:          19.8mm
          Stroke:        17mm
          Output:        1.2 BHP at 18,000 RPM
          Practical range: 2,000 - 20,000 RPM
          Weight:        10.76oz (305g) with muffler

          Center distance width across mounting holes: 1.5"  (38mm)
          Distance between mounting holes same side:   0.59" (15mm)
          Length from front of crankcase to backplate screws: 2.7" (69mm)
          Width across mounting flanges: 1.7" (45mm)
          Total height of engine: 3.02" (76.8mm)
          Length from center of head to front of crankcase: 1.9" (48mm)
          Widest width of crankcase neglecting mounting flanges: 1.2" (30mm)
          Length from front of crankcase to center distance of front
            mounting hole: 1.5" (39mm)
          Height from crankshaft center to top of head: 2.4" (61mm)
          Crankshaft thread size: 1/4-28

          Factory Settings:
             High speed: 1½ turns OUT
             Low end: 2mm gap
             Idle speed: N/A- adjusted through throttle

COMMENTS: Recommended propeller sizes: 8x6-9x6
          For the GMS .32 engine with front mounted needle, use GMEG1032
          All GMS engines use the same owner's manual

                                                                   jxs 07/31/03
                                                                         ir/jxs
                                                               updt lmm 3/27/09



– If you need more information, use these GMS Engines resources –

Click Here: Manufacturer's Product Web Page
Phone: 217-398-8970


 
Postal Address:
GMS Engines
1610 INTERSTATE DRIVE
CHAMPAIGN, IL 61822  








Click here for Units of Measure Conversion Calculators