Tower Catalog Page:	106
E-mail This Page To A Friend

 This is the 1/10 scale electric powered, radio controlled, four wheel drive,
                   Tamiya Enzo Ferrari, on-road, car kit.
                                                                              _
FEATURES: Chassis: Plastic tub TT-01 design
          Drive:  Four wheel shaft drive
          Motor: 540 motor with pre-attached leads
          Plastic and metal bushings
          Shocks: Friction, plastic body
          Gearbox: Open, front and rear
          Differentials: Bevel gear
          Transmission: Single speed
          Tires: 2.6" (65mm) outer diameter, racing radial type
          Wheels: Five spoke, 2" (51mm) outer diameter, Silver
          Speed Control: Mechanical, standard connectors
          Bumpers: Foam front bumper
          Suspension: Fixed non-adjustable
          Camber Tie Rods: Fixed non-adjustable, 3 part
          Steering Tie Rods: fixed non-adjustable
          Steering: bell-crank type
          Servo Saver: included

INCLUDES: Enzo Ferrari rolling chassis with friction type shocks, 540 motor,
            mechanical speed control, clear body, tires, foam bumper,
            spoke wheels, 19 tooth pinion gear, 61 tooth spur gear, decal sheet
            and instructions.
                                                                              _
REQUIRES: Radio: 2-channel with 2 standard servos
          Radio Batteries: 8 AA size
          Battery: 6 flat pack with standard connector
          Charger: AC/DC Timed or Peak for 6-cell battery
          Paint: Paint for a Lexan body
          Misc. Items: building and track equipment

SPECS:      VEHICLE-
          Length:      18"    (457mm)
          Width:        7.9"  (202mm)
          Height:       4.3"  (110mm)
          Weight:     2.2lbs  (990g) kit only
                      3.3lbs (1490g) with battery, speed control, motor and
                                       radio equipment
          Wheelbase:   10.1" (257mm)
          Tread: Front- 6.3" (159mm)
                 Rear-  6.2" (157mm) side-to-side at wheel centers
          Ground Clearance: .35" (9mm)
          Gear Ratio:       8.35:1
          Tires- Width: 1" (26mm)              Wheels- Width:      1" (25.4mm)
                 Inner Diameter: 1.8" (46mm)           Diameter: 1.9" (47.5mm)
                 Outer Diameter: 2.6" (65mm)
            BODY-
          Length:     18¼" (470mm)
          Width:       7½" (190mm) at rear wheels (widest point)
          Height:      4¼" (110mm)

COMMENTS: For Replacement Ball Bearings use:
            Qty.  Size      Location                       Bearing Set Qty.
            12   5 x11mm   front & rear diff gears, hubs  (use 6 DTXC1547)
             4   8 X12mm   front & rear diff gears        (use 2 DTXC1597)

          Body pictured on the box is painted with the following Tamiya colors,
            Polycarbonate paint, PS-2 Red
                                 PS-31 Smoke
                                 PC-5 Black
            Plastic Paint        TS-8 Red   (TAMR5008)

                                                                   ajw  5-05-03
                                                                         ir/jxs



– If you need more information, use these Tamiya resources –

E-mail: us_support@tamiya.com
Web Site: http://www.tamiya.com/
Phone: 800-826-4922


 
Postal Address:
Tamiya
36 DISCOVERY WAY SUITE 200
IRVINE, CA 92618  








Click here for Units of Measure Conversion Calculators