This is a motor mount for the Enya 40-46 FS, HP49 FS, O.S.40 SF, Saito 30,
Saito 40-45, Webra 40 .
INCLUDES: 1- Square glass filled motor mount
1 9/32" or 1.28125" or 32.5mm at narrowest inside width
1 1/2" or 1.5 or 38mm at widest inside width
1- 3/32" allen wrench
4- 7/64" X 5/8" Phillip head self tapping screws
2- 4/40 hex head screws with 2 wahers and 2 nuts to adjust the mount
SPECS: Length of the mounting beam is 2 7/64" or 2.109375" or 54mm
Width of the mounting beam is 25/64" or .390625" or 10mm
Height of the beam in the back portion of the mounting surface is
19/32" or .59375" or 15mm
Height of the beam in the front portion of the mounting surface is
15/64" or .234375" or 8.5mm
COMMENTS: Customer needs to drill the holes for the engine
js 06/07/94
– If you need more information, use these Ernst resources – |
Web Site: http://www.ernstmfg.com/
Phone: 503-668-5597
|
|
Postal Address:
Ernst
37570 RUBEN LANE, SUITE B
SANDY, OR 97055
|
Click here for Units of Measure Conversion Calculators
|