Parts Express Eligible:	Yes
E-mail This Page To A Friend

  This is a motor mount for the HP 21-25 FS and O.S. 20FS

INCLUDES:  1- Square glass filled motor mount
              1 17/64" or 1.265625" or 32mm at narrowest inside width
              1 6/8" or 1.75 or 44.5mm at widest inside width
           1- 3/32" allen wrench
           4- 27/64" X 5/8" Phillip head self tapping screws
           2- 4/40 hex head screws with 2 wahers and 2 nuts to adjust the mount

SPECS:  Length of the mounting beam is 2 25/64" or 2.390625" or 61mm
        Width of the mounting beam is 29/64" or .453125" or 11.5mm
        Height of the beam in the back portion of the mounting surface is
          29/64" or .453125" or 11.5mm
        Height of the beam in the front portion of the mounting surface is
          1/2" or .5" or 12.5mm
COMMENTS:  Customer needs to drill the holes for the engine

js 06/07/94



– If you need more information, use these Ernst resources –

Web Site: http://www.ernstmfg.com/
Phone: 503-668-5597


 
Postal Address:
Ernst
37570 RUBEN LANE, SUITE B
SANDY, OR 97055  








Click here for Units of Measure Conversion Calculators