View Larger Picture

Instruction Manuals:	Manual 1 (719 KB)
Tower Catalog Page:	178
E-mail This Page To A Friend

              This is the Futaba 4YF 4-Channel FM Radio System
         with the R168DF Receiver and four S3004 Ball Bearing Servos.

FEATURES: All-channel servo reversing for more installation options
          Transmitter and receiver NiCds made from genuine Sanyo cells can be
            recharged simultaneously with the included 50mA overnight charger
          Power and servo reversing switches are located down and out of the
            way for convenience and to avoid accidental changes
          The battery meter features one Green and one Red LED for easy-to-read
            GO/NO GO status.
          Ball bearing servos for smoother operation than standard servos
          Spring loaded trainer toggle switch for instant "OFF"
          Gimbals have knurled tops for a better "feel" on the sticks and to
            prevent finger slippage.
          One year limited warranty

INCLUDES: One Futaba 4YF 4-channel FM radio system with NiCd batteries, charger
            frequency flags, neck strap, servo tray, switch harness, four
            S3004 servos, servo mounting hardware, transmitter and receiver
            crystals and R168DF Receiver

REQUIRES: Charging batteries overnight

SPECS:    Transmitter:
            Modulation Method: FM (Frequency Modulation)
            Power Requirement: 9.6V NiCd battery
            Curent Drain: 180mA
            Trainer cord port is a micro port (Square)

          R168DF Receiver:
            Length:  2.2" (55.5mm)
            Width:   1.1" (28.5mm)
            Height:   .8" (19.8mm)
            Weight: 1oz (28g)

          Charger: FBC-8B(4)
            Input: 120V AC 60Hz 4W
            Output: Tx 9.6V DC 50mA
                    Rx 4.8V DC 50mA
          Tx battery: 600mAh (FUTM1440)
          Rx battery: 600mAh (FUTM1295)
          Bands: 72,75MHz

            S3004 Ball Bearing Servo FUTM0004
          Speed:  .23 sec/60° @ 4.8V
                  .19 sec/60° @   6V
          Torque:  44.3 oz-in (3.2 kg-cm) at 4.8V
                   56.8 oz-in (4.1 kg-cm) at   6V
          Length: 1.59" (40.4mm)
          Width:   .78" (19.8mm)
          Height: 1.42"   (36mm)
          Weight: 1.30oz (38g)
          Connector: "J" type with approx. 5" wire

                                                                    jxs 6/17/03
                                                                         ir/jxs



– If you need more information, use these Futaba resources –

Click Here: Manufacturer's Product Web Page
E-mail: support@futaba-rc.com
Web Site: http://www.futaba-rc.com/
Phone: 217-398-8970


 
Postal Address:
Futaba
3002 N. APOLLO DRIVE, SUITE #1
CHAMPAIGN, IL 61822  








Click here for Units of Measure Conversion Calculators