View Larger Picture

Instruction Manuals:	Manual 1 (1.0 MB)
Tower Catalog Page:	177
E-mail This Page To A Friend

    This is the Futaba 2PL AM Computer Radio system with two S3003 Servos
                            and the R152JE Receiver.

FEATURES: One-button programming for fast and easy menu access
          Ten model memory stores and selects preset programming for up to ten
            different models
          One trim switch allows setting and adjusting trims without returning
            to the menu
          Steering dual rate strategically located on the grip close to the
            trigger offers more mid-range control, crucial when cars are going
            into corners
          Steering/Throttle End Point Adjustment (EPA) limits servo travel for
            more control and to prevent servo damage
          ABS braking initiates ON and OFF pulsing for less skidding and can be
            set for slow, mid, or fast pulsing
          One Year Warranty

INCLUDES: One 2PL Magnum Transmitter with crystal
          One R152JE receiver with crystal
          Two S3003 Standard Servos with installed X style servo horns.
          One Switch Harness
          Two Servo Accessory packs
          One 4-cell Receiver battery holder
          Instruction Manual

REQUIRES: 8 AA NiCds for the transmitter (order 2 SANP3501)
          4 AA NiCds for the receiver  (order 1 FUGP7300)

SPECS:   S3003 Servo
           Speed:     .23 sec/60° @ 4.8V or .19 sec/60° @ 6V
           Torque:    44.3 oz-in @ 4.8V or 56.8 oz-in @ 6V
           Size:      1.59"L x .78"W x 1.42"H (40.4x19.8x36mm) w/o output
                      shaft
           Weight:    1.31oz (37.2g)
           Connector: "J" type with approx. 5" lead
         R152JE Receiver
          Length: 1.65" (42mm)       Receiving Frequency:     75MHz
          Width:  1.10" (28mm)       Intermediate Frequency: 455kHz
          Height:  .67" (17mm)       Power Requirement: 4.8-6V shared w/servo
          Weight:  .59oz (16.7g)     Current Drain 12mA (at No signal)

                                                                     kh12-09-03
                                                                         ir/jxs



– If you need more information, use these Futaba resources –

Click Here: Manufacturer's Product Web Page
E-mail: support@futaba-rc.com
Web Site: http://www.futaba-rc.com/
Phone: 217-398-8970


 
Postal Address:
Futaba
3002 N. APOLLO DRIVE, SUITE #1
CHAMPAIGN, IL 61822  








Click here for Units of Measure Conversion Calculators