This is the Futaba 2PL AM Computer Radio system with one S3003 Servo.
and R152JE Receiver.
Ideal for cars, boats, yachts and other models.
FEATURES: One-button programming for fast and easy menu access
Ten model memory stores and selects preset programming for up to ten
different models
One trim switch allows setting and adjusting trims without returning
to the menu
Steering dual rate strategically located on the grip close to the
trigger offers more mid-range control, crucial when cars are going
into corners
Steering/ End Point Adjustment (EPA) limits servo travel for
more control and to prevent servo damage
ABS braking initiates ON and OFF pulsing for less skidding and can be
set for slow, mid, or fast pulsing
Charge jack, for conversion kit, DTXP4010
INCLUDES: 2PL Transmitter with transmitter and receiver crystals
75MHz R152JE Receiver FUTL0206
S3003 Servo with extra horns and mounting hardware FUTM0031
4-cell AA Battery Holder FUTM1595
Switch Harness FUTM4350
REQUIRES: 8 AA batteries, (SANP3501)
SPECS: Transmitter:
Modulation Method: AM
Power Requirement: 12V, eight AA batteries
Current Drain: 250mA
Receiver:
Length: 1.65" (42mm) Receiving Frequency: 75MHz
Width: 1.10" (28mm) Intermediate Frequency: 455kHz
Height: .67" (17mm) Power Requirement: 4.8-6V shared w/servo
Weight: 0.59oz (16.7g) Current Drain 12mA (at No signal)
S3003 Servo
Speed: .23sec/60° @ 4.8V r .19 sec/60° @ 6V.
Torque: 44.3 oz-in @ 4.8V or 56.8 oz-in @ 6V
Current Drain: 8mA (at 6V / idle
Length: 1.59" (40mm)
Width: .78" (20mm)
Height: 1.42" (36mm)
Weight: 1.31oz (37.2g)
Connector: "J" type with approx. 5" (127mm) lead
jxs 7/15/03
ir/jxs
Click here for Units of Measure Conversion Calculators
|