This is a Set of 90° Non-Rotating Heavy Duty Retracts for
Model Airplanes weighing 5-10 Pounds.
FEATURES: Heavy duty struts, 3/16" diameter wire
The Robostruts will NOT directly fit these struts (the bushing that
comes with the Robostruts, ROBQ1700 - ROBQ1706, can be drilled
out to 3/16" to make them fit).
Positive UP and DOWN lock and smooth cam action mechanism.
Glass-filled nylon housing supports an Aluminum pivot bearing.
INCLUDES: One 90° Heavy Duty Retract Unit Right Side
One 90° Heavy Duty Retract Unit Left Side
Eight Mounting Screws
One Detailed Installation Instruction Sheet
SPECS: Retract Unit: Length: 3.69" (including air cylinder)
Width: 1.75"
Depth: 1.125"
Struts: Length: 7.75"
Diameter: 3/16"
Weight (per pair): 6oz
REQUIRES: Air Control Kit (Tubing, Valves, Air Vessel).
Hand Pump with Gauge, use ROBQ2363
Wheels.
COMMENTS: Optional Quick Connector (ROBQ2395)
(for ease in connecting and disconnecting the lines to the wings)
Optional Air Restrictors (ROBQ2389)
(restricts air flow to the Retract for a realistic movement,
and slows down the Retract Mechanism to scale speed).
A standard servo may be used to operate these retracts.
Axles are Not Included (The instructions state how to bend the struts
with heat)
4-28-93eke
ir/jl
updt jxs 11/05/05
– If you need more information, use these Robart resources – |
E-mail: robart@robart.com
Web Site: http://www.robart.com/
Phone: 630-584-7616
|
|
Postal Address:
Robart
625 N. 12TH STREET
ST. CHARLES, IL 60174
|
Click here for Units of Measure Conversion Calculators
Yes
E-mail This Page To A Friend
