This is a mini scale Retractable Tailwheel for .15 - .45 size planes. It is
made of durable nylon and may be operated by either a servo or pneumatically,
features a spring center, and is steerable. Includes a pre-bent wire axle but
does not include a tailwheel. Can be floor or bulkhead mounted.
If operating pneumatically, customer must purchase:
ROBQ2369 Air tubing
ROBQ2365 Air cylinder
ROBQ0215 T-connectors (to hook up with the main gear retract air system)
If operating mechanically, customer must purchase:
Pushrod
Retract servo (standard servo may be used, but will operate too quickly)
With either set-up, a pushrod is also needed for steering (could use SULQ3007,
cable pushrod, 36").
MORE+++
Specs:
Height (without wire axle): 1.19"
Width: 1.0"
Length: 1.375"
Bulkhead mount dimensions: 1" wide x .563" tall
Floor mount dimensions: 1" wide x .75" long
May use tailwheel up to 1" in diameter.
4-29-93/eke
– If you need more information, use these Robart resources – |
E-mail: robart@robart.com
Web Site: http://www.robart.com/
Phone: 630-584-7616
|
|
Postal Address:
Robart
625 N. 12TH STREET
ST. CHARLES, IL 60174
|
Click here for Units of Measure Conversion Calculators
| 
Yes
E-mail This Page To A Friend
