These Robart #675 Fixed Gear Robostruts are designed for use with the
Top Flite Giant Scale P-51 Mustang, but these offset 1/2" diameter struts can
be used with many different planes weighing up to 25 lbs and cut to various
lengths. For use on grass or paved airfields.
*
Features:
constructed from TST certified, aircraft grade materials
coated flat gray
welded and heat-treated components
1/2" diameter functional 'oleo' action struts for smoother take-offs and
landings
stylish offset stuts that accept up to a 5" diameter wheel
anti-torque clamp-style mount that allows for toe-in & toe-out adjustments
*
Includes:
One pair of Robostruts (one left-offset and one right-offset)
One pair of Robostrut mount brackets with cap screws and lock nuts for
clamping onto struts + + more + +
Includes (contd):
Two 1/4" diameter x 2 1/4" long bolts used as axles
Two 1/4" id thin washers
Two 1/4-20 jam nuts
*
Specs:
diameter of struts: 1/2" (will handle up to a 25 lb plane)
wheel size: up to 5"
axle diameter: 1/4"
overall strut length to center of axle: 9 5/8"
length of strut to offset: 6 7/8" (can be cut shorter)
length of offset: 3" (offset sticks out 1 1/4" from centerline of strut)
*
Requires:
Hardware to mount the mounting brackets to the wings of your plane is NOT
included. You'll need eight 8-32 screws (two packs of GPMQ3044 GPMQ3052
depending on length you need) and eight 8-32 blind nuts (two packs of
GPMQ3328). 5-14-98 NMH
ir/jl
– If you need more information, use these Robart resources – |
E-mail: robart@robart.com
Web Site: http://www.robart.com/
Phone: 630-584-7616
|
|
Postal Address:
Robart
625 N. 12TH STREET
ST. CHARLES, IL 60174
|
Click here for Units of Measure Conversion Calculators
|
E-mail This Page To A Friend
