This is a Pneumatic Nose Gear Retract Designed for the
TOP FLITE P-39 AIRACOBRA GOLD EDITION Airplane Kit.
FEATURES: Designed for the Top Flite P-39 Airacobra.
Shock Absorber Hinge Action On Nose Gear.
Pre-Primed Gray Color.
Self centering steerable spring nose gear keeps plane straight
after turning.
Durable Aircraft Steel and Aluminum with Postive Up and Down locks,
and Functional Oleo Struts
INCLUDES: One Steerable Nose Gear Pneumatic Retract Assembly.
(Strut and Retract Unit Must Be Joined Together)
One 1" Wide - 3/16" Diameter Wheel Shaft w/Screws.
REQUIRES: One ROBQ2302 #188VR Complete Air Kit (lines, tank, valves)
One ROBQ2363 Extra Air Tubing
One SULQ3121 Pull-Pull Kit
Misc. Hardware to Mount Retract Into Airplane and Servo for Valve.
(For the Main Gears to make a Complete Set, see COMMENTS)
COMMENTS: To Complete This Set, use #606HD 85 Degree Robart Main Gear Retracts.
SPECS: Nose Gear:
15 Degree Forward Angle w/Fork for 2-1/2" Wheel.
Overall length from mount plate to axle center hole: 6-3/4"
Distance between mount holes front to back: 1-3/4"
Distance between mount holes side to side: 1-1/2"
Retracted overall length: 8-1/2"
Retracted overall height (minus hinge spring): 1-3/8"
Retracted overall width of housing: 1"
Wire Strut Diameter: 7/16"
Weight per pair: 7.5 oz.
Weight Bearing Capacity: 14 pounds
JAL 12/15/98
ir/jl
– If you need more information, use these Robart resources – |
E-mail: robart@robart.com
Web Site: http://www.robart.com/
Phone: 630-584-7616
|
|
Postal Address:
Robart
625 N. 12TH STREET
ST. CHARLES, IL 60174
|
Click here for Units of Measure Conversion Calculators
E-mail This Page To A Friend
