This the House of Balsa Micro Electric T-6 Texan scale airplane kit
that is part of the Nick Ziroli Signature Series.
FEATURES: All balsa and plywood construction
Full color photo illustrated instructions
Full size CAD generated rolled plans
Laser cut parts make construction fast and super accurate
Self adhesive mylar decals
Hardware included
Clear plastic cowl, scoop and canopy
INCLUDES: Die-cut balsa kit parts
One plan sheet (rolled)
One instruction book
One Stars & Bars decal sheet (two small, two large)
One decal sheet including two USAF decals and side nomenclature
One clear cowling
One clear canopy
One clear scoop
One hardware bag containing: landing gear struts, balsa blocks
and miscellaneous screws.
REQUIRES: 4 channel radio w/micro receiver
Three micro servos (1-, 1-, 1-)
400 size motor with prop adapter
6x4 propeller
Electronic speed control w/built-in auto-cutoff
8-cell, 9.6volt battery
One roll of covering (Shown on box covered with Cub Yellow)
1-1/2" main wheels
1/2" tailwheel
3/32" wheel collars
Building and field equipment
SPECS: Wingspan: 35-1/4 in. (895mm)
Wing area 196 sq. in. (12.66 sq in)
Weight with radio: 21 oz. (595g)
: 15.4 oz./sq. ft. (46.99 g/sq dm)
(CG): 5/16" (8mm) forward of wing spar
Control Surface Throws:
-up and down: 3/16" (4.5mm)
-right and left: 1/2" (12.5mm)
: 1/4" (6mm) up, 1/8" (3mm) down
COMMENTS: The instructions recommend using an 1100mAh battery. ***At this
time, we do not carry a battery with 1100mAh in a size that
will fit into this airplane.***
NNA 6/23/03
Click here for Units of Measure Conversion Calculators