This is the Ofna 2-Speed Transmission for the Ultra GT and Ultra GTP series.
FEATURES: Aluminum gear holder
First gear spur holder has one-way bearing installed
Second gear holder has hole for adjusting the shift point
Spur gears have the teeth count on each spur
Gear changes are made easy by the design of the gear holders
INCLUDES: Two spur gears 45 and 49 teeth
First and second gear holder
Two clutch shoes
Center gear shaft
Two 3X15mm screws
Two 8X12mm flanged bearings
Two 4mm balls
Two 6X6mm set screws
Two 3mm nylon nuts
One clutch bell with 18 and 14 teeth gears
Two allen wrenches (2 & 2.5mm)
Second gear clutch shoes
Instruction sheet
SPECS: Diameter of 49 tooth gear: 50mm (1.99")
Diameter of 45 tooth gear: 47mm (1.85")
Width of two speed assembled: 25mm (1.01")
COMMENTS: There are other spur gears and clutch gears available:
Spur gear (1st) 48 tooth OFNA part number 35248
47 tooth OFNA part number 35247
Spur gear (2nd) 46 tooth OFNA part number 35246
44 tooth OFNA part number 35244
Clutch gear (1st) 15 tooth OFNA part number 35239
16 tooth OFNA part number 35240
17 tooth OFNA part number 35241
(2nd) 17 tooth OFNA part number 35252
19 tooth OFNA part number 35254
20 tooth OFNA part number 35255
21 tooth OFNA part number 35256
as of 9-03-03 these parts were only available
from OFNA.
ajw 09-03-03
ir/jxs
– If you need more information, use these Ofna resources – |
E-mail: help@ofna.com
Web Site: http://www.ofna.com/
Phone: 949-586-2910
|
|
Postal Address:
Ofna
7 VANDERBILT
IRVINE, CA 92618
|
Click here for Units of Measure Conversion Calculators
Yes
E-mail This Page To A Friend
