View Larger Picture

Tower Catalog Page:	59
E-mail This Page To A Friend

        This is a radio controlled, electric powered, foam construction
                   Multiplex Easy Star Airplane Model Kit
                 For Beginner to Intermediate Modeler/Fliers.

FEATURES: Construction: Elapor foam on the fuselage, wing and tail section
          Wings: two-piece, foam construction, blue in color
          Radio compartment: Foam
          Landing gear: No landing gear,model lands on its belly
          Hardware: Pushrods and other hardware included
          Motor Mount: Molded into the foam fuselage
          400 size Permax motor with high current socket and lead
          5" diameter pusher prop with black spinner (prop faces the rear of
           the airplane)
          Colorful Easy Star logo decals (must be cut out and applied)
          Ready to fly in two to six hours

INCLUDES: Foam fuselage, wings, and tail section, 400 size motor (direct drive)
            with connector and lead (must be soldered to motor), prop, spinner,
            hardware package, decals and illustrated instructions.

REQUIRES: 3-channel radio (throttle, rudder, and elevator control) with 2 micro
           servos
          12 amp speed control
          6 or 7 cell battery from 500 to 1500mAh with the proper connector
           (for the above listed speed control use this connector - MPUC8513
          Charger for the battery with proper connector - MPUC8514
          Miscellaneous building equipment

SPECS:    Wingspan: 54" (1370mm)
          Wing Area: 372 sq in (24 sq dm)
          Weight:    24oz. (680 g)
          Length:    34" (870mm)
          Airfoil:   Flat bottom, high wing
          Center of Gravity: 3.07" (78mm) Back from the wing's leading edge
            at the fuselage sides.
          Control Throws-
            Elevator: Up & Down    3/16" (5mm)
            Rudder: Right & Left   3/8" (10mm)

COMMENTS: This model is NOT made from polystyrene foam. For this reason, it is
           not possible to use white glue or epoxy glue. Use only a medium CA
           (CA+) glue and activator. Do not use CA glue designed for polysty-
           rene foam.
          If extra props are needed, use MPUA2293.

          It has been brought to our attention that the manufacturer has
          made a running change to the color of the wings in this kit. The new
          color of the wings are grey and NOT blue.

                                                                  kpm12/19/2003
                                                                         ir/jxs
                                                           updated mlm 4/1/2008



– If you need more information, use these Multiplex resources –

Web Site: http://www.multiplexusa.com/
Phone: 858-748-6948


 
Postal Address:
Multiplex
12115 PAINE STREET
POWAY, CA 92064  








Click here for Units of Measure Conversion Calculators