Instruction Manuals:	Manual 1 (385 KB)
Tower Catalog Page:	201
E-mail This Page To A Friend

           This is a G61 Ringed Sport Engine from SuperTigre.

                        *** 3-YEAR Warranty ***

FEATURES: Single Ring Piston and Cylinder Sleeve
          One-Piece Crankcase with Bolt-Through Muffler
          Two Crankshaft Ball Bearings
          Schnuerle porting
          Twin Needle Carburettor

INCLUDES: One Assembled G61 Engine with Carburetor
          One Silent muffler w/exhaust stack, gasket, bolts, lock washers,
            and nuts (Bolt-Through Style Mounting)
          One Glow Plug (SUPG1200)
          One Set of Instructions, Decals, and Parts List

SPECS:    Bore:   .945"
          Stroke: .866"
          Weight w/o muffler: 567g (19.96oz)
          Weight with muffler: 759g (26.8oz)
          Displacement: .61 cu in (9.95 cc)
          Power Output: 1.75 BHP at 16,000 RPM
          RPM Range:  2,500-16,500
          Width between centers of mounting holes:         50mm (1.97")
          Length between centers of mounting holes:        20mm  (.79")
          Width of crankcase excluding mounting flanges:   42mm (1.65")
          Length from backplate to front of drive washer:  97mm (3.82")
          Height from bottom of crankcase to top of head: 104mm (4.09")
          Crankshaft Thread Size: 5/16-24
          Suggested Props:      Break In: 11x7
          Tuned Pipe or Tuned Silencer: 11x7.5, 12x8
          Carb Settings: H-2-turns out from closed position.
                         L- Take carb off, rotate and look at bottom side.
                            Turn trottle until wide open, set tip of low end
                            needle half-way across cat eye.

REQUIRES: FUEL:18% oil content MINIMUM. A synthetic/castor blend is highly
          recommended. 10%-15% Nitromethane will work well. Higher levels of
          of Nitromethane may require adjustment of the compression ratio to
          prevent detonation.

COMMENTS: If customer wants to use a tuned pipe adapter (MACG2900), Pitts
updt*       muffler(SLIG2111), they must also purchase a muffler bolt/nut set
            (SUPG4785).
          Replacement exhaust muffler gasket is SUPG4662            UPMAF5/3/99
                                                                     4/19/96eke
                                                                          ir/jl
                                                               updt jxs 2/12/04
                                                              *updt  wm 1/23/06
                                                               updt lmm 3/26/09



– If you need more information, use these SuperTigre resources –

Click Here: Manufacturer's Product Web Page
E-mail: enginesupport@hobbico.com
Web Site: http://www.supertigre.com/
Phone: 217-398-8970


 
Postal Address:
SuperTigre
3002 N. APOLLO DRIVE, SUITE #1
CHAMPAIGN, IL 61822  








Click here for Units of Measure Conversion Calculators