Instruction Manuals:	Manual 1 (385 KB) Manual 2
Tower Catalog Page:	201
E-mail This Page To A Friend

  This is the SuperTigre G-3250 that replaces the S-3000K. It is basically an
"overbored" S-3000K engine.

                        *** 3-YEAR Warranty ***

FEATURES: Ball bearing-supported crankshaft (two bearings)
          Schnuerle Porting (AKA Schnuerle scavenging)
          Aluminum Piston with piston ring
          Better power-to-weight ratio than gasoline (Weed Eater) engines

INCLUDES: One Radial motor mount (backplate mount)
          One Assembled G3250 Engine w/Carb
          One Glow Plug (SUPG1200)
          One Instruction Set, Decals, and Parts List

REQUIRES: Propeller
          Muffler
          Fuel (at least 16% lubricants for break-in, after break-in, you can
                go down to 14%. 100% Synthetic or Synthetic/Castor will work.)

SPECS:    Bore:   36mm (1.417")
          Stroke: 32mm (1.128")
          Displacement: 32.61cc (1.989 cu in)
          Power output: 3.2BHP @ 7,700
          RPM range: 2,000-9,000
          Weight w/o muffler: 1219 (43oz)
          Width between centers of mounting holes:         64mm (2.52")
          Length between centers of mounting holes:        23mm  (.91")
          Width of crankcase excluding mounting flanges:   54mm (2.13")
          Length from backplate to front of drive washer: 142mm (5.59")
          Height from bottom of crankcase to top of head: 137mm (5.39")
          Crankshaft size: 10mm-1.25
          Suggested prop size: 20x8, 18x8
          Carb Settings: H-2-turns out from closed position.
                         L- Take carb off, rotate and look at bottom side.
                            Turn trottle until wide open, set tip of low end
                            needle half-way across cat eye.

                                                               updt jxs 2/12/04
                                                               updt lmm 3/26/09



– If you need more information, use these SuperTigre resources –

Click Here: Manufacturer's Product Web Page
E-mail: enginesupport@hobbico.com
Web Site: http://www.supertigre.com/
Phone: 217-398-8970


 
Postal Address:
SuperTigre
3002 N. APOLLO DRIVE, SUITE #1
CHAMPAIGN, IL 61822  








Click here for Units of Measure Conversion Calculators