Tower Catalog Page:	203
E-mail This Page To A Friend

This is the Nitro Star .15 cu in (2.49cc)T-15 Pull Start Engine from HPI Racing
       This is the standard engine currently (1/15/04) being put in the
                 Nitro MT 2, Rush Evo, & Nitro 3 Evo kits.

FEATURES: ABC construction
          6mm Dual Needle Rotary carb
          Side exhaust
          Powder black case
          Tall powder gray heatsink head (10 fins)
          Aggressive porting
          Standard shaft

INCLUDES: Glow plug, brass flywheel collet, air cleaner, instructions & decals

REQUIRES: Glow fuel and glow starter

SPECS:    Carburetor:     Rotary type, 6mm
          Ports:          3
          Weight:         10.2oz (290g)
          Displacement:   .15 cu in (2.49cc)
          Horse Power:    1.2hp @ 29,000 RPM
          Bore:           15.0mm
          Stroke:         13.6mm

          Distance between mounting holes front to back:         0.43" (11mm)
          Distance between mounting holes side to side:          1.2"  (31.5mm)
          Overall width including mounting flanges               1.6"  (40mm)
          Overall height from bottom of crancase to top of head: 3.9" (100mm)
          Overall length from back of recoil to end of shaft:    3.5"  (88mm)
          Diameter of head at largest point:                     1.9"  (49mm)
          Length of shaft:                                       0.75" (19mm)
          Length of threaded portion of shaft:                   0.47" (12mm)
          Distance between exhaust mounting holes:               1.1"  (27.2mm)

          This engine also includes mounting holes in the bottom of
           the crankcase. The specs for these are as follows.
          Distance between mounting holes side to side:         0.72" (18.2mm)
          Distance between mounting holes front to rear:        0.83" (21mm)

COMMENTS: This engine will also accept the #87120 (HPIP8720) HPI Roto Start
           System. This engine will easily & directly fit into any nitro car or
           truck that accepts small block (.12-.15) engines with pull starters.
                                                                    per HPI

                                                                      tjt 11504
                                                                         ir/jxs
                                                               updt jxs 4/20/05



– If you need more information, use these HPI Racing resources –

E-mail: support@hpiracing.com
Web Site: http://www.hpiracing.com/
Phone: 949-753-1099


 
Postal Address:
HPI Racing
70 ICON STREET
FOOTHILL RANCH, CA 92610  








Click here for Units of Measure Conversion Calculators